| No. | Brand | J | F | f | T | A | s | S | r |
| 5-Pack | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1500 | fag | - | - | - | - | - | - | - | - |
| LS180 | - | - | - | - | - | - | - | - | - |
| 15mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| 8x16x5 | - | - | - | - | - | - | - | - | - |
| 697-2RS | - | - | - | - | - | - | - | - | - |
| NJ219G | Nachi | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| MB5209XP | - | - | - | - | - | - | - | - | - |
| 10W | - | - | - | - | - | - | - | - | - |
| Mfj10-28yc | YUKEN | - | - | - | - | - | - | - | - |
| 1985-1987 | koyo | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| PV24 | - | - | - | - | - | - | - | - | - |
| (Zhr17) | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| E0e1e2 | - | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| H2EWXBBL53B | Parker | - | - | - | - | - | - | - | - |
| 160.16.1424 | - | - | - | - | - | - | - | - | - |
| 6202-2RS | - | - | - | - | - | - | - | - | - |
| 90149 / CR90149 Stainless Speedi Sleeve For Shaft Repair | d:60.000 mm; Basic Static Radial Load Rating Co:14300 N; B:13.00 mm; Basic Dynamic Radial Load Rating C:16500 N; Oil Speed Rating Open/Shielded n2:9000 rpm; Accessories:One Seal; Sealed Speed Rating n3:4500 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; D:85.0000 mm; |
| AHX3026 Withdrawal Sleeve(matched Bearing:23026CCK/W33, C3026K) | Seals or Shields:Open Type; Cage Type:Plastic; Availability:In Stock; Static Load Rating (kN):28; d:80mm; Preload:Light; Weight:0.85 KGS; Oil Limiting Speed (r/min):24000; Fatigue Load Rating (kN):1.18; B:22mm; |
| AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) | Ca:102.794 mm; L:558.8 mm; Initial grease fill:793.8 g; P120°:85.9 kN; Labyrinth ring:2 x LOR 116; A2:222.25 mm; da:111.125 mm; P180°:94.3 kN; A1:158.75 mm; PG:1/4 NPT; |
| HMV58E / HMV 58E Hydraulic Nut 292x390x58mm | Sealed Speed Rating n3:3600 rpm; Basic Static Radial Load Rating Co:32500 N; B:20.00 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Dynamic Radial Load Rating C:41000 N; Accessories:Shield & Seal; Fillet Radius ra:1.00 mm; D:110.0000 mm; d:70.000 mm; |
| 85691 / CR85691 Stainless Speedi Sleeve For Shaft Repair | r min.:1.1 mm; E:356 mm; Maximum dynamic radial loads Fr max.:1900 kN; D:520 mm; Basic static load rating C0:2900 kN; b:13 mm; F:248 mm; B:168 mm; Maximum static radial loads F0r max.:2650 kN; Mass bearing:217 kg; |
| 87842 / CR87842 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; B:37mm; Reference Speed Rating (r/min):4300; d:75mm; Clearance:C3; D:160mm; Static Load Rating (kN):321; Cage Type:Steel; SKU:21315ejw33c3-timken; Limiting Speed Rating (r/min):3600; |
| CR99143 Stainless Steel Speedi Sleeve For Shaft Repair | Accessories:One Seal; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; B:27.00 mm; D:72.0000 mm; d:35.000 mm; Basic Dynamic Radial Load Rating C:37700 N; Basic Static Radial Load Rating Co:27500 N; |
| 81753 / CR81753 Stainless Speedi Sleeve For Shaft Repair | a:27.732 mm; Basic dynamic load rating C:240 kN; ra max.:3 mm; B:33 mm; T:36 mm; r1,2 min.:3 mm; d1 ≈:98.75 mm; Da max.:129 mm; d:65 mm; Limiting speed:4800 r/min; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
CP3553 Thrust Plate 35x52.5x0.8mm Video