| No. | Brand | J | F | f | T | A | s | S | r |
| 17013 | INA | - | - | - | - | - | - | - | - |
| 10-10-30 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 100M | - | - | - | - | - | - | - | - | - |
| (LCC-1007) | - | - | - | - | - | - | - | - | - |
| 6219-2Z/C3 | - | - | - | - | - | - | - | - | - |
| YF0-81530-62-03 | - | - | - | - | 279.4 mm | - | - | - | - |
| 6745-11-3102 | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| 65ml-33g | - | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 12X3w | - | - | - | - | - | - | - | - | - |
| LPVD140 | - | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| SHF20-XRB | - | - | - | - | - | - | - | - | - |
| 412 | NSK | 96 mm | - | - | - | 32 mm | - | - | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| CL2B-KA168-2 | - | - | - | - | - | - | - | 4.763 mm | - |
| MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm | Clearance:C3; Limiting Speed Rating (r/min):16000; Cage Type:Steel; B:17mm; SKU:6305/c3-skf; Condition:New; Reference Speed Rating (r/min):24000; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.49; Availability:In Stock; |
| KMK 7 Lock Nut (M35x1.5)x52x9mm | Dynamic Load Rating (kN):143.1; Seals or Shields:Open Type; Clearance:Standard; Speed Rating (r/min):5800; Availability:In Stock; D:220mm; B:28mm; Weight:2.75 KGS; Cage Type:Plastic; SKU:2mm9332wicrsul-timke; |
| 90761 / CR90761 Stainless Speedi Sleeve For Shaft Repair | d:17mm; Static Load Rating (kN):6.6; B:14mm; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):10.4; Weight:0.12 KGS; Limiting Speed Rating (r/min):9700; Fatigue Load Rating (kN):0.335; Clearance:Standard; SKU:s6303-2rsr-fag; |
| 99282 / CR99282 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:78100 N; B:38.10 mm; d:60.000 mm; Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:1.50 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:88000 N; D:110.0000 mm; Oil Speed Rating n2:5000 rpm; |
| AH24130 Withdrawal Sleeve(matched Bearing:24130CCK,24130CAK, C4130K) | Dynamic Load Rating (kN):75; D:110mm; Seals or Shields:Open Type; Availability:In Stock; SKU:7310becbj-skf; Static Load Rating (kN):51; Cage Type:Steel; Reference Speed Rating (r/min):8000; B:27mm; Fatigue Load Rating (kN):2.16; |
| CP1.5120155 Thrust Plate 120x153.8x1.5mm | Mass pillow block:19 kg; L:330.2 mm; ba:40.481 mm; Pa:9.43 kN; J max.:279.4 mm; S:4.763 mm; A2:209.55 mm; Cap bolt recommended tightening torque:298.3 N·m; h:35.719 mm; H1:88.9 mm; |
| MSR45x1.5 Precision Locknut / MSR-M45x1.5 Locking Nut (M45x1.5)x68x22mm | B:34 mm; G:M 180x3; Mass adapter sleeve assembly:7.2 kg; Hydraulic nut:HMV 36 E; d1:163.512 mm; d:180 mm; d3:230 mm; B1:122 mm; Lock nut:KMFE 36; |
| FTRA3047 Thrust Bearing Ring / Thrust Needle Bearing Washer 30x47x1mm | G2:M 6; B5:77 mm; d1:360 mm; Hydraulic nut:HMV 76E; d3:490 mm; G:Tr 380x5; G3:9 mm; Locking device:MS 3176; Lock nut:HME 3176; B1:264 mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CP3047 Thrust Plate 30x46.5x0.8mm Video