| No. | Brand | J | F | f | T | A | s | S | r |
| UG223HL | Link-Belt | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| sae4130 | - | - | - | - | - | - | - | - | - |
| 6315 | FAFNIR | - | - | - | - | - | - | - | - |
| 3mm/3.6mm/5mm | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| Y2-Hb10B/Y2-Ha10B/Y2-Hb20B | - | - | - | - | - | - | - | - | - |
| 6800RS | - | - | - | - | - | - | - | - | - |
| (JS-SSN003) | - | - | - | - | - | - | - | - | - |
| 6204ETN9 | SKF | - | - | - | 47.1 mm | - | - | - | - |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 96-90421-2 | - | - | - | - | - | - | - | - | - |
| 2p | - | - | - | - | - | - | - | - | - |
| 4WE10D32/OFCW110N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| 6416 | - | - | - | - | - | - | - | - | - |
| 86 | SKF | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| 2 | Thomson | - | - | - | - | - | - | - | - |
| AH3032 Withdrawal Sleeve(matched Bearing:23032CCK/W33, 23032CAK/W33, C3032K) | Clearance:Standard; Limiting Speed Rating (r/min):48000; D:16mm; Availability:In Stock; Reference Speed Rating (r/min):95000; d:5mm; Seals or Shields:Open Type; B:5mm; Static Load Rating (kN):0.38; SKU:625-2rz-skf; |
| AS4565 Thrust Needle Roller Bearing Washer 45x65x1mm | d:70mm; D:150mm; Seals or Shields:Open Type; Cage Type:Brass; Weight:0.02 KGS; Clearance:C3; SKU:22314-e1a-k-m-c3-qbl; Availability:In Stock; B:51mm; |
| FTRC7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x2mm | R1:65.088 mm; PG:1/8 NPT; H:222.25 mm; Initial grease fill:181.44 g; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:515.2 N·m; Housing:FSAF 617; Labyrinth ring:2 x LOR 182; R2:30.163 mm; A2:173.037 mm; |
| AOH3172G(23172CCK, 23172CAK, 23172CCK/W33, C3172KM Bearing Withdrawal Sleeve) | Basic Dynamic Radial Load Rating C:45700 N; Accessories:One Shield & Snap-Ri; B:23.00 mm; Basic Static Radial Load Rating Co:32500 N; d:30.000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; Fillet Radius ra:1.50 mm; D:90.0000 mm; |
| FTRB6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x1.5mm | B:46mm; Cage Type:Brass; d:100mm; D:180mm; Seals or Shields:Open Type; Weight:0.02 KGS; Clearance:Standard; SKU:22220-e1a-m-qbl; Availability:In Stock; |
| TRC613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x2.4mm | Fatigue Load Rating (kN):0.55; Limiting Speed Rating (r/min):16100; SKU:6007-c3-fag; Weight:0.02 KGS; Reference Speed Rating (r/min):11600; Seals or Shields:Open Type; B:14mm; Cage Type:Steel; Dynamic Load Rating (kN):17; d:35mm; |
| CR99834 Stainless Steel Speedi Sleeve For Shaft Repair | Cage Type:Plastic; Static Load Rating (kN):29.935; SKU:2mmvc9318hxcrsul-tim; Availability:In Stock; d:90mm; Weight:0.57 KGS; Seals or Shields:Open Type; B:18mm; Dynamic Load Rating (kN):19.972; Clearance:Standard; |
| TMDT 2-32 Insulated Surface Probe | D:420.0000 mm; Sealed Speed Rating n3:890 rpm; d:280.000 mm; Accessories:Two Seals; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1700 rpm; Basic Dynamic Radial Load Rating C:302000 N; Grease Speed Rating Open/Shielded n1:1400 rpm; Basic Static Radial Load Rating Co:405000 N; B:65.00 mm; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
CP1226 Thrust Plate 12x25.5x0.8mm Video