| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| 1U1779 | - | - | - | - | - | - | - | - | - |
| SK210LC-8 | INA | - | - | - | - | - | - | - | - |
| L650xw440xh345mm | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| NJ219G | Nachi | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 24lbs | - | - | - | - | - | - | - | - | - |
| Ba180-a | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| 160.16.1424 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| PV24 | - | - | - | - | - | - | - | - | - |
| 4pcs | - | - | - | - | - | - | - | - | - |
| 86435 / CR86435 Stainless Speedi Sleeve For Shaft Repair | d:240mm; Weight:0.02 KGS; Limiting Speed Rating (r/min):1600; Dynamic Load Rating (kN):2080; Fatigue Load Rating (kN):255; D:400mm; SKU:23148cck/c4w33-skf; Reference Speed Rating (r/min):1200; Seals or Shields:Open Type; Availability:In Stock; |
| 99700 / CR99700 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; Cage Type:Brass; d:180mm; B:126mm; Weight:0.02 KGS; D:380mm; Seals or Shields:Open Type; SKU:22336-k-mb-c3-qbl; Availability:In Stock; |
| CR99272 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bushing:0.16 kg; Effective load carrying cross section A:4930 mm²; Permissible sliding velocity v max.:0.5 m/s; d:85 mm; Tolerance shaft:h8; D:95 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:140 N/mm²; Specific static load factor K0:200 N/mm²; |
| EAZ 265 Induction Heater | Fillet Radius rb:0.040 in; Fillet Radius ra:0.08 in; B:0.7500 in; Basic Dynamic Radial Load Rating C:47500 N; D:5.0000 in; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:4800 rpm; Basic Static Radial Load Rating Co:51000 N; d:3.500 in; |
| HMV114E / HMV 114E Hydraulic Nut 572x716x85mm | Accessories:Chain Sheave Type- 2; Basic Interchange:-; Basic Interchange NDH:-; Basic Radial Load Rating-Static SCO:3440 lbf; Basic Interchange SPLIT:-; Basic Interchange BCA:-; Basic Interchange NSK:-; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:5730 lbf; |
| TRB3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x1.6mm | Cage Type:Plastic; Availability:In Stock; Clearance:Standard; B:15mm; Speed Rating (r/min):2900; D:72mm; d:35mm; Dynamic Load Rating (kN):45.4; Weight:0.29 KGS; Seals or Shields:Open Type; |
| HMV102E / HMV 102E Hydraulic Nut 512x648x80mm | d:59.987 mm; rb max.:3.3 mm; Da min.:102 mm; Calculation factor e:0.83; ra max.:3.5 mm; d1 ≈:97.1 mm; db min.:73.5 mm; da max.:74 mm; Ca min.:5 mm; Calculation factor Y:0.72; |
| FTRA6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x1mm | Grease Speed Rating n1:5300 rpm; B:28.00 mm; Oil Speed Rating n2:6300 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:17000 N; d:60.000 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CP917 Thrust Plate 9x16.4x0.8mm Video