| No. | Brand | J | F | f | T | A | s | S | r |
| FZX750 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 21' | - | - | - | - | - | - | - | - | - |
| A4VG125 | Rexroth | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 1/2 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| SL192317 | - | - | - | - | - | - | - | - | - |
| NUP236E.M1.C2 | fag | - | - | - | - | - | - | - | - |
| rig,BMV630 | - | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 7211BTVR | fag | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| TRC-411 | koyo | - | - | - | - | - | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| PC120-5 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| CP2917 Thrust Plate 9x16.4x2mm | H2:45 mm; H:242 mm; L:410 mm; P0°:600 kN; P55°:680 kN; A2:195 mm; P90°:410 kN; A1:120 mm; Da:200 mm; Mass housing:22 kg; |
| AS1528 Thrust Needle Roller Bearing Washer 15x28x1mm | r3,4 min.:4 mm; d:200 mm; r1,2 min.:5 mm; Dimension series:4GB; C:48 mm; a:67.575 mm; Limiting speed:1700 r/min; Basic static load rating C0:1120 kN; Db min.:336 mm; Basic dynamic load rating C:845 kN; |
| VHIN 10 Bearing Induction Heater | Limiting Speed Rating (r/min):11400; Dynamic Load Rating (kN):5.1; B:10mm; SKU:s6003-2rsr-fag; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):2.6; d:17mm; Clearance:Standard; D:35mm; Weight:0.04 KGS; |
| 99374 / CR99374 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Static Load Rating (kN):40200; B:30.2mm; Weight:0.02 KGS; Dynamic Load Rating (kN):50700; Availability:In Stock; Oil Limiting Speed (r/min):4600; Seals or Shields:Two Rubber Seals; Grease Limiting Speed (r/min):4000; Cage Type:Plastic; |
| TRB6681 Thrust Bearing Ring / Thrust Needle Bearing Washer 104.775x128.575x1.6mm | d:85mm; Weight:0.56 KGS; B:18mm; Dynamic Load Rating (kN):37.5; D:120mm; Seals or Shields:Open Type; Static Load Rating (kN):38.7; Speed Rating (r/min):10800; Clearance:Standard; Cage Type:Plastic; |
| AOH24088 (24088ECAK30/W33, 24088CAK, 24088CCK Bearing Withdrawal Sleeve | RG:1/4-28 UNF; Thread grub screw G2:M6; Bearing:YSPAG 207-107; Limiting speed:1100 r/min; Db1:87 mm; Recommended tightening torque for grub screw:7.4 N·m; L:118 mm; End cover:ECY 207; Basic dynamic load rating C:25.5 kN; A:34.5 mm; |
| CR99153 Stainless Steel Speedi Sleeve For Shaft Repair | a:17.5 mm; Permissible sliding velocity v max.:0.5 m/s; d:230 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; h:232.5 mm; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; Tolerance shaft:e7; α:124 °; |
| BIC2035 Inner Ring 35x44x22mm | Weight:0.02 KGS; D:260mm; Availability:In Stock; Clearance:C3; SKU:23938-s-mb-c3-qbl; Cage Type:Brass; d:190mm; B:52mm; Seals or Shields:Open Type; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
CP33552 Thrust Plate 35x51.5x3mm Video