| No. | Brand | J | F | f | T | A | s | S | r |
| 400 | - | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 9234004 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| (6315) | Timken | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| F84003 | Bower | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| 30% | - | - | - | - | - | 114.3 mm | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| NNCL-4914V | - | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| Withdrawal Sleeves AH208 | Limiting Speed Rating (r/min):10000; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; Dynamic Load Rating (kN):15.9; d:10mm; B:22mm; Minimum Load Factor:0.0038; Cage Type:Steel; SKU:52202-skf; |
| 90766 / CR90766 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; Weight:0.20 KGS; SKU:lj3/4-zz-r&m; D:1.875 inch; Clearance:Standard; Availability:In Stock; d:0.75 inch; B:0.563 inch; |
| TRD411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x3.2mm | B:25.40 mm; d:25.000 mm; Oil Speed Rating n2:10000 rpm; Accessories:No Shield, no Seal; D:62.0000 mm; Grease Speed Rating n1:7500 rpm; Sealed Speed Rating n3:7500 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:34100 N; Basic Static Radial Load Rating Co:30500 N; |
| TRC2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x2.4mm | d:85mm; D:130mm; Speed Rating (r/min):8700; Availability:In Stock; Weight:0.90 KGS; Cage Type:Plastic; SKU:3mm9117wicrdum-timke; Static Load Rating (kN):63.2; Dynamic Load Rating (kN):55.6; Clearance:Standard; |
| 81391 / CR81391 Stainless Speedi Sleeve For Shaft Repair | Design variant/feature:NNU K30/W33; D:1280 mm; Fatigue load limit Pu:2400 kN; Reference speed:320 r/min; D1 ≈:1141 mm; K:12 mm; F:921 mm; Da max.:1240 mm; r1,2 min.:9.5 mm; Basic dynamic load rating C:16500 kN; |
| TRE512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x4mm | Dw:2 mm; r1 max.:0.6 mm; r1,2 min.:0.2 mm; r2 max.:0.8 mm; Mass needle roller:0.44 g; Lw:17.8 mm; |
| TRA3446 Thrust Bearing Ring / Thrust Needle Bearing Washer 53.975x73.025x0.8mm | P90°:32.5 kN; Mass pillow block:12.7 kg; RG:1/4 NPT; h:28.575 mm; End plug (suffix Y):EPR 7; PosiTrac Plus contact element:2 x B10724-37; P150°:18.2 kN; J max.:244.475 mm; P120°:20 kN; P180°:22.2 kN; |
| CR99266 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Limiting Speed Rating (r/min):3600; Weight:0.02 KGS; D:230mm; Reference Speed Rating (r/min):2600; Availability:In Stock; Cage Type:Steel; Fatigue Load Rating (kN):88; Dynamic Load Rating (kN):735; SKU:22226e/c3-skf; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CMVL 3860-ML MicroVibe P Kit Video