| No. | Brand | J | F | f | T | A | s | S | r |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| 478362 | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| 0821200230 | Rexroth | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| PGH4 | Rexroth | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| RS25 | - | - | - | - | - | - | - | - | - |
| 100M | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 8155 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| KM-29 | SKF | - | - | - | - | - | - | - | - |
| 150W | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| T73T-1217 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| (JHK-S06) | - | - | - | - | - | - | - | - | - |
| TRC3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x2.4mm | Weight:7.00 KGS; Availability:In Stock; B:42mm; SKU:3mm9134wicrsum-timke; Clearance:Standard; Static Load Rating (kN):221.1; Seals or Shields:Open Type; d:170mm; Cage Type:Plastic; Speed Rating (r/min):4400; |
| TRA3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x0.8mm | Clearance:C3; Static Load Rating (kN):1.95; D:26mm; B:8mm; SKU:629-c-2hrs-c3-fag; Dynamic Load Rating (kN):4.85; Limiting Speed Rating (r/min):19000; Fatigue Load Rating (kN):0.099; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; |
| 87090 / CR87090 Stainless Speedi Sleeve For Shaft Repair | Insert Bearing IB:Stainless Steel; Basic Static Radial Load Rating Co:1470 lbf; Inner Width B:1.220 in; Bore Diameter D:3/4 in; Weight W:0.31 lb; Basic Dynamic Radial Load Rating:2380 lbf; Diameter D3:1.110 in; Outside Diameter D2:1.8504 in; Outher Width C:0.5512 in; Dimension S:0.500 in; |
| CPR85095 Thrust Plate 50x95x8mm | Clearance:C4; Grease Limiting Speed (r/min):950; Static Load Rating (kN):1750; Availability:In Stock; Oil Limiting Speed (r/min):1200; B:100mm; Dynamic Load Rating (kN):965; D:280mm; SKU:24036ce4c4-nsk; Weight:22.70 KGS; |
| 86454 / CR86454 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:160mm; Oil Limiting Speed (r/min):3000; B:32.5mm; SKU:30218-ntn; d:90mm; Clearance:Standard; Condition:New; Dynamic Load Rating (kN):208; Availability:In Stock; |
| FTRC90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x2mm | Sealed Speed Rating n3:1400 rpm; d:190.000 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:2000 rpm; Fillet Radius ra:2.00 mm; B:46.00 mm; Basic Static Radial Load Rating Co:216000 N; Basic Dynamic Radial Load Rating C:195000 N; D:290.0000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; |
| AOHX31/670 (231/670CAK 231/670CCK, 231/670CAK/W33, C31/670K Bearing Withdrawal Sleeve) | G3:13 mm; d1:630 mm; G:Tr 670x6; B5:102 mm; Lock nut:HM 30/670; A:8 mm; B:80 mm; Hydraulic nut:HMV 134E; G2:G 1/8; Locking device:MS 30/670; |
| 85643 / CR85643 Stainless Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):64000; Cage Type:Plastic; SKU:7202cydu/glp4-nachi; Preload:Light; D:35mm; Static Load Rating (kN):4.55; Availability:In Stock; Seals or Shields:Open Type; B:11mm; Grease Limiting Speed (r/min):46500; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
TMAS 720 Machinery Shim Kit Video