| No. | Brand | J | F | f | T | A | s | S | r |
| TCR2 | - | - | - | - | - | - | - | - | - |
| (VT215) | - | - | - | - | - | - | - | - | - |
| 500tph | - | - | - | - | - | - | - | - | - |
| 280 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 100W/300W | - | - | - | - | - | - | - | - | - |
| 5-Pack | - | - | - | - | - | - | - | - | - |
| 5202-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| s.201140 | - | - | - | - | - | - | - | - | - |
| LM301H | - | - | - | - | - | - | - | - | - |
| 90/600 | - | - | - | - | - | - | - | - | - |
| 6002ZZE | Nachi | - | - | - | - | - | - | - | - |
| NNCL-4914V | - | - | - | - | - | - | - | - | - |
| AM119683 | John Deere | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| 15x32x8 | - | - | - | - | - | - | - | - | - |
| MKD090B-035-KG1-KN | Rexroth | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| NUP311 | NSK | - | - | - | - | - | - | - | - |
| AOH24152(24152CCK30/W33, 24152CCK, 24152CAK Bearing Withdrawal Sleeve) | B:43mm; Clearance:C3; SKU:22311ek/c3-skf; Fatigue Load Rating (kN):30; Weight:0.02 KGS; d:55mm; Reference Speed Rating (r/min):4300; Seals or Shields:Open Type; Static Load Rating (kN):280; Dynamic Load Rating (kN):270; |
| AHX330 Withdrawal Sleeve 145x155x83mm | Oil Limiting Speed (r/min):75500; d:10mm; SKU:7000acydu/glp4-nachi; Static Load Rating (kN):2.41; Cage Type:Plastic; D:26mm; Weight:0.02 KGS; Dynamic Load Rating (kN):5.15; Preload:Light; B:8mm; |
| 99401 / CR99401 Stainless Speedi Sleeve For Shaft Repair | Calculation factor X:0.54; Limiting speed:3000 r/min; Basic dynamic load rating C:520 kN; Basic static load rating C0:865 kN; r0:2 mm; d1 ≈:260 mm; ra max.:3 mm; r1,2 min.:4 mm; Calculation factor e:1.34; Calculation factor Y0:0.44; |
| 87503 / CR87503 Stainless Speedi Sleeve For Shaft Repair | Mass bushing:6.38 kg; D1:255 mm; d:220 mm; Specific dynamic load factor K:25 N/mm²; a:5 mm; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; Tolerance shaft:e7; |
| FTRC1831 Thrust Bearing Ring / Thrust Needle Bearing Washer 18x31x2mm | Weight:0.02 KGS; D:210mm; Seals or Shields:Open Type; Cage Type:Plastic; Clearance:C4; SKU:23028-e1-tvpb-c4-qbl; d:140mm; Availability:In Stock; B:53mm; |
| CR99162 Stainless Steel Speedi Sleeve For Shaft Repair | T:196.85 mm; Design variant/feature:TDI/Y2; B:196.85 mm; Mass bearing:235 kg; r3,4 min.:6.4 mm; Calculation factor Y2:2.9; Comparative radial load rating CF:1060 kN; Fatigue load limit Pu:815 kN; D1 ≈:670 mm; d1 ≈:598 mm; |
| CR99863 Stainless Steel Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.92; Static Load Rating (kN):15.3; Availability:In Stock; B:17mm; d:35mm; Reference Speed Rating (r/min):10300; Cage Type:Brass; Clearance:C3; D:72mm; SKU:6207-ma-c3-fag; |
| 87915 / CR87915 Stainless Speedi Sleeve For Shaft Repair | K:7.5 mm; T:98 mm; Mass bearing pair:7.3 kg; Da min.:128 mm; D:150 mm; Calculation factor e:0.43; Calculation factor Y2:2.3; da max.:96 mm; Calculation factor Y1:1.6; ra max.:2 mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
TKSA 60 Shaft Alignment Tool Video