| No. | Brand | J | F | f | T | A | s | S | r |
| 316ss | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| 80W | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 821458 | - | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| LiFePO4 | - | - | - | - | - | - | - | - | - |
| XA81420 | Thomson | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 1220mmx2440mmx18mm | - | - | - | - | - | - | - | - | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| NJ209EM | Rollway | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| Dh220 | - | - | - | - | - | - | - | 4.763 mm | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 307PP | Nachi | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| AS6085 Thrust Needle Roller Bearing Washer 60x85x1mm | Clearance:Standard; B:16mm; Dynamic Load Rating (kN):21.8; Seals or Shields:Open Type; d:50mm; Cage Type:Steel; D:80mm; Fatigue Load Rating (kN):--; Weight:0.02 KGS; Static Load Rating (kN):16.6; |
| Plummer Block Housings SNV130-F-L + 22312-K + H2312X202 + TCV612X202 | Mass bearing:470 kg; Limiting speed:1100 r/min; Calculation factor e:1.34; ra max.:6 mm; h:20.5 mm; d:480 mm; Fatigue load limit Pu:76.5 kN; r1,2 min.:7.5 mm; D1 ≈:721 mm; Calculation factor Y0:0.44; |
| HMV40E / HMV 40E Hydraulic Nut (M200x3)x282x51mm | Sealing solution:Double-lip seals; d1 ≈:109.22 mm; ra max.:1 mm; b:10.5 mm; Basic dynamic load rating C:680 kN; da min.:95.9 mm; Design (sliding contact surface combination):Steel/steel; Lubricant:Regular relubricatio; rb max.:1 mm; b1:8 mm; |
| HMV69E / HMV 69E Hydraulic Nut 347x456x64mm | Reference speed:2800 r/min; G1:16 mm; B:67 mm; Ca min.:2.1 mm; Fatigue load limit Pu:73.5 kN; G:M 105x2; ra max.:2.5 mm; Operating clearance factor k2:0.106; D1 ≈:166 mm; Basic static load rating C0:695 kN; |
| TMMK 10-35 Bearing Installation Combo Tool Kit | d:120 mm; d1:103.188 mm; Lock nut:AN 24; d3 max.:155.702 mm; Hydraulic nut:HMVC 24E; G:119.786 mm; Lock washer:W 24; B1:117.805 mm; Threads per inch:12; B4:23.825 mm; |
| CR99224 Stainless Steel Speedi Sleeve For Shaft Repair | Calculation factor Y0:1.8; d2 ≈:574 mm; r1,2 min.:7.5 mm; Reference speed:400 r/min; G:Tr 480x5; b:22.3 mm; B:296 mm; Da max.:798 mm; Mass bearing + sleeve:725 kg; K:12 mm; |
| 99450 / CR 99450 Stainless Speedi Sleeve For Shaft Repair | Preload:Light; d:70mm; Seals or Shields:Open Type; Clearance:Standard; Dynamic Load Rating (kN):126; Cage Type:Plastic; Grease Limiting Speed (r/min):7500; B:35mm; Weight:0.02 KGS; Availability:In Stock; |
| TKTI 21 Thermal Camera | Clearance:C4; Availability:In Stock; Cage Type:Steel; Weight:0.02 KGS; Seals or Shields:Open Type; d:220mm; B:120mm; D:370mm; SKU:23144cck/c4w33-qbl; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
VHIS 100 Bearing Induction Heater Video