| No. | Brand | J | F | f | T | A | s | S | r |
| IP65 | - | - | - | - | 66.675 mm | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 6209TB | fag | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 16-16-16 | - | - | - | - | - | - | - | - | - |
| 1-4/5" | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| 25%Min | - | - | - | - | - | - | - | - | - |
| 8x8 | - | - | - | - | - | - | - | - | - |
| SK235 | - | - | - | - | - | - | - | - | - |
| 50% | INA | - | - | - | - | - | - | - | - |
| 6212RCE | NSK | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| YZF-R6 | - | - | - | - | - | - | - | - | - |
| 8x16x5 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| 608ZZ | Rollway | - | - | - | - | - | - | - | - |
| 2.2 | Dodge | - | - | - | - | - | - | - | - |
| NP300 | - | - | - | - | - | - | - | - | - |
| PC40MR-1 | Komatsu | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| TRC1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x2.4mm | Basic Dynamic Radial Load Rating:3510 lbf; Insert Bearing IB:Stainless Steel; Weight W:1.30 lb; Dimension S1:1.0000 in; Dimension N:0.3906 in; Basic Static Radial Load Rating Co:2520 lbf; Distance J:1.8750 in; Width A:1.0625 in; Distance H:1.250 in; Dimension F:0.5000 in; |
| AS2035 Thrust Needle Roller Bearing Washer 20x35x1mm | Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:2900 N; B:9.00 mm; Basic Dynamic Radial Load Rating C:5400 N; Grease Speed Rating n1:22000 rpm; Oil Speed Rating n2:28000 rpm; d:15.000 mm; D:32.0000 mm; |
| 86468 / CR86468 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; D:85.0000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:32500 N; Basic Dynamic Radial Load Rating C:39300 N; B:19.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; |
| FTRE5070 Thrust Bearing Ring / Thrust Needle Bearing Washer 50x70x3mm | Comparative axial load rating CFa:236 kN; Comparative radial load rating CF:1430 kN; Mass bearing:279 kg; Basic static load rating C0:14300 kN; Fatigue load limit Pu:1100 kN; D:610 mm; Thrust factor K:1.76; d1 ≈:488 mm; d:460 mm; B:360 mm; |
| CP21730 Thrust Plate 17x29.5x2mm | B:18mm; Seals or Shields:Two Rubber Seals; Clearance:Standard; SKU:6012-2rsr-fag; Limiting Speed Rating (r/min):3750; d:60mm; Weight:0.02 KGS; Static Load Rating (kN):23.2; Dynamic Load Rating (kN):31.5; Availability:In Stock; |
| CR99167 Stainless Steel Speedi Sleeve For Shaft Repair | P120°:280 kN; H1:112 mm; Housing:FSNL 520-617 RU; A2:181 mm; Bearing (basic designation):2220 K; P0°:470 kN; N:24 mm; Oil seal:2 x TSN 520 U; Cap bolt, rec. tightening torque:200 N·m; Locating ring:2 x FRB 12/180; |
| 99499 / CR 99499 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating n2:5000 rpm; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm; B:36.50 mm; Accessories:Two Shields; d:60.000 mm; Sealed Speed Rating n3:3800 rpm; Basic Dynamic Radial Load Rating C:78100 N; Basic Static Radial Load Rating Co:88000 N; |
| H2318 Adapter Sleeves 80x120x86mm | d:15mm; B:13mm; Clearance:Standard; D:42mm; SKU:7302beat85-nsk; Cage Type:Plastic; Availability:In Stock; Weight:0.09 KGS; Static Load Rating (kN):6.9; Dynamic Load Rating (kN):13.6; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
VHIS 75 Bearing Induction Heater Video