| No. | Brand | J | F | f | T | A | s | S | r |
| 316ss | - | - | - | - | - | - | - | - | - |
| 6030 | NSK | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| NNCL-4914V | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| MKD090B-035-KG1-KN | Rexroth | - | - | - | - | - | - | - | - |
| CL2B-dB04 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| VOE14521451 | - | - | - | - | - | - | - | - | - |
| Jy-614 | - | - | - | - | - | - | - | - | - |
| (21% | - | - | - | - | - | - | - | - | - |
| 018/020/045/050/057/063/074/081/098/106/131/141 | - | - | - | - | - | - | - | - | - |
| 10.9 | - | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| 23122 | - | - | - | - | - | - | - | - | - |
| CP485110 Thrust Plate 85x109.3x4mm | Cage Type:Steel; Availability:In Stock; Limiting Speed Rating (r/min):6000; SKU:22216ek/c3-skf; Reference Speed Rating (r/min):4300; Fatigue Load Rating (kN):29; Static Load Rating (kN):270; Weight:0.02 KGS; Dynamic Load Rating (kN):236; D:140mm; |
| AS110145 Thrust Needle Roller Bearing Washer 110x145x1mm | d:95 mm; Calculation factor kr:0.25; Mass bearing:9.8 kg; Reference speed:3600 r/min; db min.:135 mm; ra max.:2.5 mm; B:67 mm; da min.:110 mm; Basic dynamic load rating C:530 kN; Da max.:185 mm; |
| HMV44E / HMV 44E Hydraulic Nut 222x306x52mm | d:40mm; Clearance:Standard; Fatigue Load Rating (kN):1.1; Static Load Rating (kN):26; SKU:7208begby-skf; D:80mm; B:18mm; Weight:0.02 KGS; Dynamic Load Rating (kN):36.4; Seals or Shields:Open Type; |
| AOHX31/670 (231/670CAK 231/670CCK, 231/670CAK/W33, C31/670K Bearing Withdrawal Sleeve) | G3:13 mm; d1:630 mm; G:Tr 670x6; B5:102 mm; Lock nut:HM 30/670; A:8 mm; B:80 mm; Hydraulic nut:HMV 134E; G2:G 1/8; Locking device:MS 30/670; |
| 99606 / CR99606 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Dynamic Load Rating (kN):1090; Cage Type:Brass; SKU:23044came4-nsk; B:90mm; Static Load Rating (kN):1980; Availability:In Stock; Weight:29.70 KGS; D:340mm; Oil Limiting Speed (r/min):1200; |
| AHX320 Withdrawal Sleeve(matched Bearing:2220K, 1320K, 22220EK, 21320CCK, C2220K) | Oil Limiting Speed (r/min):9800; D:230mm; Availability:In Stock; Clearance:Standard; SKU:7226ctrdulp3-nsk; Seals or Shields:Open Type; Static Load Rating (kN):209; Cage Type:Plastic; Weight:0.02 KGS; Preload:Light; |
| EAZ 181 Induction Heater | d:55.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:14000 rpm; D:80.0000 mm; Basic Static Radial Load Rating Co:40500 N; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:37100 N; Oil Speed Rating n2:22000 rpm; B:26.00 mm; |
| CR99242 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; Clearance:Standard; D:290mm; Cage Type:Brass; SKU:23232-e1a-m-qbl; Weight:0.02 KGS; B:104mm; d:160mm; Seals or Shields:Open Type; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
EAZ 246 Induction Heater Video