| No. | Brand | J | F | f | T | A | s | S | r |
| 20W/30W/50W | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| NNF5009-2LSNV | - | - | 108 mm | - | - | - | - | - | - |
| 200 | NTN | - | - | - | - | - | - | - | - |
| 61804-2RS | INA | - | - | - | - | - | - | - | - |
| 7956 | - | - | - | - | - | - | - | - | - |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 99002 | - | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| .25mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| Light/50W/Solar | - | 273.05 mm | - | - | - | - | 41.275 mm | 0.794 mm | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| G5-20-1FE13F-L | Parker | - | - | - | - | - | - | - | - |
| MSA-01-X-30, | YUKEN | - | - | - | - | - | - | - | - |
| YZF-R6 | - | - | - | - | - | - | - | - | - |
| HMV116E / HMV 116E Hydraulic Nut 582x726x85mm | Cage Type:Steel; d:50mm; Dynamic Load Rating (kN):21.8; Static Load Rating (kN):16.5; Weight:0.27 KGS; Clearance:C3; Availability:In Stock; Reference Speed Rating (r/min):12000; B:16mm; Seals or Shields:Two Metal Shields; |
| CMAS 100-SL Machine Condition Advisor | Grease Limiting Speed (r/min):15000; Seals or Shields:Open Type; Dynamic Load Rating (kN):41; Availability:In Stock; Cage Type:Plastic; B:19mm; D:85mm; Clearance:Standard; Oil Limiting Speed (r/min):24000; Fatigue Load Rating (kN):1.25; |
| CR99081 Stainless Steel Speedi Sleeve For Shaft Repair | Grease Speed Rating Open/Shielded n1:3400 rpm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2200 rpm; Basic Static Radial Load Rating Co:80000 N; d:120.000 mm; Fillet Radius ra:2.00 mm; B:28.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:85200 N; |
| 15 mm x 32 mm x 9 mm AOH32/750 (232/750CAK/W33, 232/750CAK, 232/750CCK Bearing Withdrawal Sleve) | Reference speed:28000 r/min; U:10 mm; Basic dynamic load rating C:4.57 kN; Fw:10 mm; Limiting speed:32000 r/min; Fatigue load limit Pu:0.63 kN; Mass needle roller and cage assembly:0.0016 kg; Basic static load rating C0:5.7 kN; Ew:13 mm; Size (mm):15 mm x 32 mm x 9 mm ; |
| FTRD2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x2.5mm | B:60mm; Reference Speed Rating (r/min):1600; Clearance:Standard; SKU:23948emw33-timken; Dynamic Load Rating (kN):785; Seals or Shields:Open Type; Weight:12.90 KGS; d:240mm; Availability:In Stock; Limiting Speed Rating (r/min):1300; |
| AHX3026 Withdrawal Sleeve(matched Bearing:23026CCK/W33, C3026K) | Seals or Shields:Open Type; Cage Type:Plastic; Availability:In Stock; Static Load Rating (kN):28; d:80mm; Preload:Light; Weight:0.85 KGS; Oil Limiting Speed (r/min):24000; Fatigue Load Rating (kN):1.18; B:22mm; |
| MSR48x1.5 Precision Locknut / MSR-M48x1.5 Locking Nut (M48x1.5)x68x25mm | B:104mm; Clearance:C3; D:320mm; Seals or Shields:Open Type; Weight:0.02 KGS; Availability:In Stock; d:190mm; SKU:23138cc/c3w33-qbl; Cage Type:Steel; |
| 150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm | Seals or Shields:Open Type; Weight:0.02 KGS; Clearance:Standard; Availability:In Stock; D:35mm; SKU:2202j-qbl; Cage Type:Steel; d:15mm; B:14mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
EAZ 226 Induction Heater Video