| No. | Brand | J | F | f | T | A | s | S | r |
| 400W | - | - | - | - | - | - | - | - | - |
| N20.5% | - | - | - | - | - | - | - | - | - |
| NUTR203/3AS | NTN | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 100W/300W | - | - | - | - | - | - | - | - | - |
| 80W | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 6206 | fag | - | - | - | - | - | - | - | - |
| 6304-2RS | SKF | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| HP22 | Danfoss | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 801234-AAA-NR | Parker | - | - | - | - | - | - | - | - |
| GK45DO | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| 1250*2500 | - | - | - | - | - | - | - | 4.763 mm | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| 52Pcs | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| 2X(607Z | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| HMV170E / HMV 170E Hydraulic Nut 852x1020x99mm | Availability:In Stock; Clearance:C3; Seals or Shields:Open Type; B:92mm; SKU:23048-mb-c3-qbl; Cage Type:Brass; Weight:0.02 KGS; d:240mm; D:360mm; |
| CR99138 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:C3; D:280mm; Availability:In Stock; Fatigue Load Rating (kN):71; Limiting Speed Rating (r/min):2800; d:200mm; B:60mm; Seals or Shields:Open Type; Cage Type:Brass; SKU:23940-s-mb-c3-fag; |
| CR99210 Stainless Steel Speedi Sleeve For Shaft Repair | B:80mm; Cage Type:Brass; Clearance:C3; Availability:In Stock; d:130mm; Weight:0.02 KGS; SKU:23226-e1a-k-m-c3-qbl; D:230mm; Seals or Shields:Open Type; |
| FTRA100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1mm | Limiting speed:30000 r/min; ra max.:1 mm; Reference speed:17000 r/min; F:26.5 mm; D:47 mm; B:14 mm; d:20 mm; Basic static load rating C0:22 kN; db min.:31 mm; Basic dynamic load rating C:28.5 kN; |
| TRA3446 Thrust Bearing Ring / Thrust Needle Bearing Washer 53.975x73.025x0.8mm | P90°:32.5 kN; Mass pillow block:12.7 kg; RG:1/4 NPT; h:28.575 mm; End plug (suffix Y):EPR 7; PosiTrac Plus contact element:2 x B10724-37; P150°:18.2 kN; J max.:244.475 mm; P120°:20 kN; P180°:22.2 kN; |
| AH2336G Withdrawal Sleeve(matched Bearing:22336CAK/W33,22336CCK/W33) | PG:1/8 NPT; R1:53.181 mm; Bearing:22216 EK; Da:140 mm; R2:21.431 mm; ba:33.337 mm; Initial grease fill:87.885 g; Cap bolt recommended tightening torque:298.3 N·m; P150°:44.5 kN; Mass pillow block:21.8 kg; |
| CR99230 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; Clearance:C3; Cage Type:Steel; SKU:62201-2rs1/c3-skf; Weight:0.05 KGS; Limiting Speed Rating (r/min):15000; Fatigue Load Rating (kN):0.132; d:12mm; Availability:In Stock; Static Load Rating (kN):3.1; |
| 87526 / CR87526 Stainless Speedi Sleeve For Shaft Repair | d:60mm; Cage Type:Plastic; Clearance:C3; Dynamic Load Rating (kN):74900; Availability:In Stock; D:110mm; Oil Limiting Speed (r/min):5000; Static Load Rating (kN):61400; B:36.5mm; Weight:0.02 KGS; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
EAZ 174 Induction Heater Video