| No. | Brand | J | F | f | T | A | s | S | r |
| 2 | - | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 4900 | SKF | - | - | - | - | - | - | - | - |
| 6206 | fag | - | - | - | - | - | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 2p | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| 24124-E1-C4 | fag | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| 20-5-52/100ym | Rexroth | - | - | - | - | - | - | - | - |
| 650 | fag | - | - | - | - | - | - | - | - |
| KC0 | - | - | - | - | - | - | - | 4.763 mm | - |
| 10.9 | - | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| 6.38 | INA | - | - | - | - | - | - | - | - |
| GS2068 | - | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| AHX3038 Withdrawal Sleeve 180x190x96mm | ra max.:1.5 mm; r5 min.:0.6 mm; Da max.:82 mm; Ca min.:3 mm; r3,4 min.:1.5 mm; Reference speed:4800 r/min; rc max.:0.6 mm; T:43.5 mm; D:90 mm; Limiting speed:7500 r/min; |
| TRB1625 Thrust Bearing Ring / Thrust Needle Bearing Washer 25.4x39.675x1.6mm | SKU:s607-2z-zen; d:7mm; Clearance:Standard; Weight:0.20 KGS; Seals or Shields:Two Metal Shields; D:19mm; Availability:In Stock; Cage Type:Steel; B:6mm; |
| EAZ 202 Induction Heater | d:20mm; Weight:0.02 KGS; Seals or Shields:Open Type; B:21mm; Availability:In Stock; D:52mm; Cage Type:Brass; Clearance:C3; SKU:2304mc3-qbl; |
| 90792 / CR90792 Stainless Speedi Sleeve For Shaft Repair | SKU:7004cd/p4adgb-skf; B:12mm; Fatigue Load Rating (kN):0.18; Dynamic Load Rating (kN):8.71; Weight:0.07 KGS; Cage Type:Plastic; Clearance:Standard; Static Load Rating (kN):4.3; Oil Limiting Speed (r/min):63000; Seals or Shields:Open Type; |
| AOH30/670 (230/670CAK,230/670CCK, 230/670CAK/W33, C30/670KM Bearing Withdrwal Sleeve) | Oil Limiting Speed (r/min):14700; Static Load Rating (kN):52.5; d:80mm; Grease Limiting Speed (r/min):9800; Clearance:Standard; Preload:Light; Seals or Shields:Open Type; Dynamic Load Rating (kN):55.5; SKU:7016a5trdulp3-nsk; Weight:0.02 KGS; |
| CP46590 Thrust Plate 65x89.3x4mm | Static Load Rating (kN):50.5; SKU:7310beat85-nsk; B:27mm; Dynamic Load Rating (kN):74.5; d:50mm; Cage Type:Plastic; Clearance:Standard; Weight:1.12 KGS; Seals or Shields:Open Type; Availability:In Stock; |
| CR99133 Stainless Steel Speedi Sleeve For Shaft Repair | H1:440 mm; N1:48 mm; Cap bolt, rec. tightening torque:850 N·m; Pa:2700 kN; P0°:8400 kN; Initial grease fill, 40%:17.5 kg; ATK:600 mm; Labyrinth seal:2 x TS 530; Eye bolt, size:2 x M 48; H:880 mm; |
| 90156 / CR90156 Stainless Speedi Sleeve For Shaft Repair | D:72mm; Availability:In Stock; Seals or Shields:Single Rubber Seal; d:30mm; Clearance:C3; Cage Type:Steel; SKU:6306-rsr-c3-fag; Limiting Speed Rating (r/min):6300; B:19mm; Static Load Rating (kN):16.3; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TIH L44/MV Bearing Induction Heater Video