| No. | Brand | J | F | f | T | A | s | S | r |
| 2x | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 52x | - | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| rig,BMV630 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| EX60 | - | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| Lt110 | - | - | - | - | - | - | - | - | - |
| 950 | - | - | - | - | - | - | - | - | - |
| 12W | - | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 24124-E1-C4 | fag | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| F12 | - | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| 7216 | - | - | - | - | - | - | - | - | - |
| 6212LLB/2A, | NTN | - | - | - | - | - | - | - | - |
| 27pc | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| (JHK-S06) | - | - | - | - | - | - | - | - | - |
| PC60 | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| AH24028 Withdrawal Sleeve(matched Bearing:24028CCK30/W33, C4028K30V) | Reference speed:32000 r/min; Mass bearing:0.13 kg; Basic static load rating C0:7.8 kN; Da max.:46.4 mm; D1 ≈:43.95 mm; ra max.:1 mm; B:15 mm; Calculation factor f0:13.9; da min.:30.6 mm; Limiting speed:20000 r/min; |
| 99549 / CR 99549 Stainless Speedi Sleeve For Shaft Repair | Specific dynamic load factor K:100 N/mm²; α:6 °; Mass rod end:0.9 kg; G:M 30x2; dk:40.7 mm; l1 min.:65 mm; d:30 mm; B:22 mm; l2 max.:149 mm; C1 max.:20 mm; |
| MSR10x0.75 Precision Locknut / MSR-M10x0.75 Locking Nut (M10x0.75)x24x14mm | Specific dynamic load factor K:140 N/mm²; d:180 mm; D:200 mm; Tolerance shaft:h8; Mass bushing:2.01 kg; Tolerance housing:H7; Coefficient of friction µ min.:0.03; Specific static load factor K0:200 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.08; |
| TKRT 10 Digital Tachometer | Mass adapter sleeve assembly:15.6 kg; B:38 mm; Lock nut:HM 3056; d:280 mm; d1:260 mm; A:4.2 mm; G:Tr 280x4; G3:9 mm; Hydraulic nut:HMV 56E; d3:330 mm; |
| 90103 / CR90103 Stainless Speedi Sleeve For Shaft Repair | B:18mm; SKU:1208etn9/c3-qbl; Cage Type:Plastic; Availability:In Stock; Clearance:C3; Weight:0.02 KGS; Seals or Shields:Open Type; D:80mm; d:40mm; |
| AH209 Withdrawal Sleeve 40x45x26mm | Clearance:Standard; Seals or Shields:Open Type; Cage Type:Steel; d:70mm; B:35mm; Reference Speed Rating (r/min):8500; SKU:1314-skf; Weight:0.02 KGS; Fatigue Load Rating (kN):1.34; Limiting Speed Rating (r/min):6000; |
| AH30/950 Withdrawal Sleeve 900x950x355mm | B:7mm; Weight:0.20 KGS; SKU:6810zz-nsk; Static Load Rating (kN):6200; D:65mm; Cage Type:Steel; Availability:In Stock; Grease Limiting Speed (r/min):9500; Dynamic Load Rating (kN):6400; Clearance:Standard; |
| 30 mm x 72 mm x 19 mm 99560 / CR 99560 Stainless Speedi Sleeve For Shaft Repair | Reference speed:6700 r/min; da max.:53 mm; Fatigue load limit Pu:11.8 kN; Calculation factor e:0.33; ra max.:0.8 mm; a:16.993 mm; Limiting speed:8000 r/min; Mass bearing:0.65 kg; Db min.:76 mm; T:23.812 mm; Size (mm):30 mm x 72 mm x 19 mm ; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TIH L77 Bearing Induction Heater Video