| No. | Brand | J | F | f | T | A | s | S | r |
| NUP2310 | - | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| 9e-1b40-0876-1105 | - | - | - | - | - | - | - | - | - |
| 5421 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | 46.4 mm | 34.5 mm | - | - | - |
| MCV3_ | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 57207 | Nachi | - | - | - | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| 250 | NTN | - | - | - | - | - | - | - | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| 9114617 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| NU2219-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
| MI17412 | - | - | - | - | - | - | - | - | - |
| (1M2) | - | - | - | - | - | - | - | - | - |
| 22213E | SKF | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| FTRB90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x1.5mm | Availability:In Stock; SKU:22234cde4c3-nsk; B:86mm; d:170mm; Dynamic Load Rating (kN):990; D:310mm; Grease Limiting Speed (r/min):1100; Oil Limiting Speed (r/min):1400; Seals or Shields:Open Type; Cage Type:Steel; |
| AS85110 Thrust Needle Roller Bearing Washer 85x110x1mm | r3,4 min.:1.5 mm; B:22 mm; a:21.531 mm; ra max.:2 mm; Calculation factor Y0:0.8; Calculation factor Y:1.5; d:60 mm; Basic dynamic load rating C:120 kN; Fatigue load limit Pu:13.2 kN; Da max.:101.5 mm; |
| AS0414 Thrust Needle Roller Bearing Washer 4x14x1mm | d:100mm; Availability:In Stock; Cage Type:Brass; B:52mm; Seals or Shields:Open Type; Clearance:C4; SKU:23120-e1a-m-c4-qbl; D:165mm; Weight:0.02 KGS; |
| CP475100 Thrust Plate 75x99.3x4mm | D:200mm; Availability:In Stock; SKU:23124-e1a-m-qbl; Clearance:Standard; Weight:0.02 KGS; d:120mm; Cage Type:Brass; Seals or Shields:Open Type; B:62mm; |
| AOH31/1000 (C31/1000K, 231/1000CAK, 231/1000CCK, 231/1000CCK/W33, 231/1000CAKF/W33, C31/1000KMB Bearing Withdrawal Sleeve) | Clearance:C3; Cage Type:Steel; Weight:0.02 KGS; d:20mm; Seals or Shields:Open Type; Availability:In Stock; B:15mm; D:52mm; SKU:6304/c3-qbl; |
| 99487 / CR 99487 Stainless Speedi Sleeve For Shaft Repair | Da:289.999 mm; P120°:133 kN; H1:169.875 mm; Mass pillow block:121 kg; End plug (suffix Y):EPR 21; R1:104.775 mm; Labyrinth ring:2 x LOR 156; Stabilizing ring:2 x 38151-38; Cap bolt recommended tightening torque:813.5 N·m; P180°:145 kN; |
| AS6085 Thrust Needle Roller Bearing Washer 60x85x1mm | Clearance:Standard; B:16mm; Dynamic Load Rating (kN):21.8; Seals or Shields:Open Type; d:50mm; Cage Type:Steel; D:80mm; Fatigue Load Rating (kN):--; Weight:0.02 KGS; Static Load Rating (kN):16.6; |
| 85577 / CR85577 Stainless Speedi Sleeve For Shaft Repair | Basic Static Radial Load Rating Co:68000 N; Accessories:Removable Metal Shie; d:70.000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; B:63.50 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:104000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3000 rpm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
TIH 220M/LV Bearing Induction Heater Video