| No. | Brand | J | F | f | T | A | s | S | r |
| 23076 | - | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| 2700K/3000K | - | - | - | - | - | - | - | - | - |
| (18mm, | - | - | - | - | - | 40 mm | - | - | - |
| 56650 | Timken | - | - | - | - | - | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 6306 | SKF | - | - | - | 23.812 mm | - | - | - | - |
| 625 | NTN | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 6001C3 | SKF | - | - | - | - | - | - | - | - |
| 8x16x5 | - | - | - | - | - | - | - | - | - |
| 5182A | - | - | - | - | - | - | - | - | - |
| ZX200 | - | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| IR110X120X30 | INA | - | - | - | - | - | - | - | - |
| (80W | - | - | - | - | - | - | - | - | - |
| Ba180-a | - | - | - | - | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| 60/120LEDs | - | - | - | - | - | - | - | - | - |
| 1210EKTN9 | SKF | - | - | - | - | - | - | - | - |
| MU1012L | Bower | - | - | - | - | - | - | - | - |
| 21311 | NSK | - | - | - | - | - | - | - | - |
| 40PCS | - | - | - | - | - | - | - | - | - |
| TKRT 20 Multi Functional Digital Tachometer | U:16 mm; Basic static load rating C0:22.4 kN; Reference speed:18000 r/min; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x28x4; Basic dynamic load rating C:19 kN; Limiting speed:20000 r/min; Fatigue load limit Pu:2.7 kN; Fw:20 mm; Mass needle roller and cage assembly:0.02 kg; Ew:28 mm; |
| CR99225 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):16.5; d:50mm; Dynamic Load Rating (kN):21.8; B:16mm; Cage Type:Steel; Seals or Shields:Two Metal Shields; Clearance:Standard; Weight:0.27 KGS; Limiting Speed Rating (r/min):8300; Reference Speed Rating (r/min):12000; |
| FTRD75100 Thrust Bearing Ring / Thrust Needle Bearing Washer 75x100x2.5mm | Clearance:C2; Dynamic Load Rating (kN):1940; Seals or Shields:Open Type; Static Load Rating (kN):2610; D:340mm; Availability:In Stock; Cage Type:Brass; Limiting Speed Rating (r/min):990; d:190mm; Reference Speed Rating (r/min):1100; |
| CP46085 Thrust Plate 60x84.3x4mm | Cage Type:Plastic; Oil Limiting Speed (r/min):7500; Clearance:Standard; d:160mm; D:240mm; Preload:Light; Weight:5.15 KGS; SKU:7032acdga/p4a-skf; Static Load Rating (kN):204; Fatigue Load Rating (kN):6.2; |
| HMV47E / HMV 47E Hydraulic Nut 237x326x54mm | Basic Radial Load Rating-Static SCO:61800 lbf; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 309; Basic Interchange BCA:-; Basic Interchange NSK:-; Basic Interchange:-; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:18400 lbf; Basic Interchange NDH:-; |
| ZM60 Precision Locknut (M60x2)x80x16mm | Oil Speed Rating Open/Shielded n2:43000 rpm; Fillet Radius ra:0.30 mm; B:7.00 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:1360 N; d:8.000 mm; Sealed Speed Rating n3:23000 rpm; Basic Dynamic Radial Load Rating C:3250 N; D:22.0000 mm; |
| CR99819 Stainless Steel Speedi Sleeve For Shaft Repair | Housing:SAFS 217; L:330.2 mm; H2:38.1 mm; Bearing:22217 E; Lock washer:W 17; dc:80.963 mm; PG:1/8 NPT; P150°:26.7 kN; P120°:28.9 kN; Stabilizing ring:SR-17-14; |
| AOH24064G(24064CCK, 24064CAK, 24064CCK30/W33 Bearing Withdrawal Sleeve) | d:30 mm; F:35 mm; B:12.5 mm; Mass inner ring:0.023 kg; r, r1,2 min.:0.3 mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
TIH 220m Bearing Induction Heater Video