| No. | Brand | J | F | f | T | A | s | S | r |
| 2004 | Dodge | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| J05E | - | - | - | - | - | - | - | - | - |
| 1210EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| 12229-16G00-0B0 | - | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| 100% | INA | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 1200X1000 | - | - | - | - | - | - | - | - | - |
| 962985 | - | - | - | - | - | - | - | - | - |
| 3/8" | Danfoss | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| 1100.32.00. | - | - | - | - | - | - | - | - | - |
| EX85 | - | - | - | - | - | - | - | - | - |
| 350W | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| T396ZX | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| 99374 / CR99374 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Static Load Rating (kN):40200; B:30.2mm; Weight:0.02 KGS; Dynamic Load Rating (kN):50700; Availability:In Stock; Oil Limiting Speed (r/min):4600; Seals or Shields:Two Rubber Seals; Grease Limiting Speed (r/min):4000; Cage Type:Plastic; |
| AH317 Withdrawal Sleeve 80x85x52mm | SKU:21314-e1-tvpb-fag; D:150mm; Availability:In Stock; Limiting Speed Rating (r/min):5000; Static Load Rating (kN):270; Clearance:Standard; d:70mm; B:35mm; Seals or Shields:Open Type; Cage Type:Plastic; |
| MSR28x1.5 Precision Locknut / MSR-M28x1.5 Locking Nut (M28x1.5)x46x20mm | Static Load Rating (kN):8.1; Seals or Shields:Open Type; B:20mm; D:90mm; Clearance:C3; d:50mm; Dynamic Load Rating (kN):22.8; Availability:In Stock; Oil Limiting Speed (r/min):8000; Cage Type:Steel; |
| 35 mm x 72 mm x 17 mm AH308 Withdrawal Sleeve 35x40x29mm | Clearance:Standard; SKU:3205-b-2hrs-tvh-fag; D:52mm; Availability:In Stock; Static Load Rating (kN):14.6; Limiting Speed Rating (r/min):7500; B:20.6mm; Cage Type:Plastic; d:25mm; Dynamic Load Rating (kN):21.2; Size (mm):35 mm x 72 mm x 17 mm ; |
| AOH240/750G (240/750CAK30/W33, 240/750CAK, 240/750CCK Bearing Withdrawal Sleeve) | Basic dynamic load rating C:425 kN; Basic static load rating C0:850 kN; M:4 mm; D:90.488 mm; r2 min.:1 mm; da max.:65.2 mm; Specific dynamic load factor K:150 N/mm²; Da min.:79 mm; b1:5 mm; Sealing solution:Triple-lip seals; |
| 85011 / CR85011 Stainless Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):19000; Availability:In Stock; Clearance:Standard; d:15mm; Dynamic Load Rating (kN):12.5; B:13mm; SKU:7302bw-nsk; D:42mm; Cage Type:Steel; Static Load Rating (kN):6.6; |
| 84781 / CR84781 Stainless Speedi Sleeve For Shaft Repair | SKU:6315-m-c3-fag; Seals or Shields:Open Type; Cage Type:Brass; Limiting Speed Rating (r/min):9500; B:37mm; Clearance:C3; Static Load Rating (kN):76.5; Fatigue Load Rating (kN):4.65; d:75mm; D:160mm; |
| CMIN 400-K Ultrasonic Probe | D:120.0000 mm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:73500 N; B:38.10 mm; Grease Speed Rating n1:3600 rpm; d:65.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:4800 rpm; Sealed Speed Rating n3:3600 rpm; Basic Dynamic Radial Load Rating C:80600 N; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
TMBH 1 Portable Bearing Induction Heater Video