| No. | Brand | J | F | f | T | A | s | S | r |
| PC450-8 | - | - | - | - | - | - | - | 2.5 mm | - |
| 511031 | Timken | - | - | - | - | - | - | - | - |
| #JH415747, | Timken | - | - | - | - | - | - | - | - |
| XM1 | TOKIMEC | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| PartsSH100 | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| KM-29 | SKF | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 23122 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 90/600 | - | - | - | - | - | - | - | - | - |
| R0632-025-00 | Rexroth | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| 800mm | - | - | - | - | - | - | - | - | - |
| CL2B-dB04 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| AH2356H Withdrawal Sleeve Supplier | Seals or Shields:Open Type; Oil Limiting Speed (r/min):19000; Weight:0.60 KGS; Grease Limiting Speed (r/min):12000; Preload:Medium; B:20mm; Availability:In Stock; Cage Type:Plastic; D:110mm; Fatigue Load Rating (kN):1.93; |
| AOH3152G(23152CCK, 23152CAK, 23152CCK/W33, C3152K Bearing Withdrawal Sleeve) | B:24mm; Dynamic Load Rating (kN):66.3; Grease Limiting Speed (r/min):9500; Preload:Light; SKU:7214acdga/p4a-skf; Static Load Rating (kN):55; Weight:1.10 KGS; d:70mm; Clearance:Standard; Fatigue Load Rating (kN):2.36; |
| 99700 / CR99700 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; Cage Type:Brass; d:180mm; B:126mm; Weight:0.02 KGS; D:380mm; Seals or Shields:Open Type; SKU:22336-k-mb-c3-qbl; Availability:In Stock; |
| AS110145 Thrust Needle Roller Bearing Washer 110x145x1mm | d:95 mm; Calculation factor kr:0.25; Mass bearing:9.8 kg; Reference speed:3600 r/min; db min.:135 mm; ra max.:2.5 mm; B:67 mm; da min.:110 mm; Basic dynamic load rating C:530 kN; Da max.:185 mm; |
| AOHX3192G (23192CAK/W33, C3192KM, 23192CAK, 23192CCK Bearing Withdrawal Sleeve) | Oil Speed Rating Open/Shielded n2:8500 rpm; d:35.000 mm; Accessories:One Shield; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:39300 N; Grease Speed Rating Open/Shielded n1:7000 rpm; B:21.00 mm; D:80.0000 mm; Basic Static Radial Load Rating Co:28500 N; |
| VHIS 75 Bearing Induction Heater | Availability:In Stock; d:120mm; Cage Type:Steel; Clearance:Standard; B:80mm; Reference Speed Rating (r/min):1700; Limiting Speed Rating (r/min):1600; Static Load Rating (kN):1080; SKU:24124kejw33-timken; D:200mm; |
| TKSA 41 Shaft Alignment Tool | Oil Limiting Speed (r/min):1200; Weight:22.70 KGS; Dynamic Load Rating (kN):965; SKU:24036ce4c3-nsk; Cage Type:Steel; Static Load Rating (kN):1750; Grease Limiting Speed (r/min):950; d:180mm; Availability:In Stock; B:100mm; |
| CR99205 Stainless Steel Speedi Sleeve For Shaft Repair | Da max.:58.5 mm; Basic dynamic load rating C:58 kN; B:18.288 mm; Fatigue load limit Pu:6.2 kN; db min.:41.5 mm; rb max.:1.3 mm; r3,4 min.:1.3 mm; r1,2 min.:0.8 mm; Ca min.:3 mm; Dimension series:LM 48500; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
729659 C Electric Hot Plate Video