| No. | Brand | J | F | f | T | A | s | S | r |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| MM212KS2CR | FAFNIR | - | - | - | - | - | - | - | - |
| Q235 | INA | - | - | - | - | - | - | - | - |
| 121341J | DAIKIN | - | - | - | - | - | - | - | - |
| 150kg | - | - | - | - | - | - | - | - | - |
| F-53125.02.NUKR | INA | - | - | - | - | - | - | - | - |
| 0.5mm | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| Pe-Sb-1316 | - | - | 572.3 mm | - | - | - | - | - | - |
| 6416 | - | - | - | - | - | - | - | - | - |
| 960 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 6204ETN9 | SKF | - | - | - | 47.1 mm | - | - | - | - |
| 4pcs | - | - | - | - | - | - | - | - | - |
| 4WE6D53/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 400 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 2004 | Dodge | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| FTRA1024 Thrust Bearing Ring / Thrust Needle Bearing Washer 10x24x1mm | B:39.00 mm; Fillet Radius ra:2.00 mm; Speed Rating-Open and Shielded-Oil OSO:12600 rpm; Fillet Radius rb:1.00 mm; Basic Radial Load Rating-Static SCO:129000 N; Basic Radial Load Rating-Dynamic DC:159000 N; Speed Rating-Open and Shielded-Grease OSG:8700 rpm; Type:300-RDM Series (from; D:170.0000 mm; d:80.000 mm; |
| FTRE4060 Thrust Bearing Ring / Thrust Needle Bearing Washer 40x60x3mm | Seals or Shields:Open Type; Oil Limiting Speed (r/min):14700; Dynamic Load Rating (kN):79; Preload:Medium; Availability:In Stock; Cage Type:Plastic; Clearance:Standard; B:25mm; Static Load Rating (kN):66.5; d:75mm; |
| TRE916 Thrust Bearing Ring / Thrust Needle Bearing Washer 14.275x25.4x4mm | Availability:In Stock; D:56.896mm; Cage Type:Steel; d:25.4mm; B:19.368mm; Weight:0.02 KGS; Clearance:Standard; Seals or Shields:Open Type; SKU:1780/1729-koyo; |
| AOH24084 (24084ECAK30/W33, 24084CAK, 24084CCK Bearing Withdrawal Sleeve) | Calculation factor e:0.33; Mass bearing:395 kg; Fatigue load limit Pu:1370 kN; D1 ≈:606 mm; Comparative radial load rating CF:1660 kN; Comparative axial load rating CFa:273 kN; Calculation factor Y1:2; Calculation factor Y2:3; Design variant/feature:TQOSN/GWSI; B:422.275 mm; |
| TRC411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x2.4mm | l7 min.:88 mm; Mass rod end:15 kg; G:M 80; dk:105 mm; d:80 mm; α:6 °; B:55 mm; Basic static load rating C0:655 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:48 mm; |
| AH2356GH Withdrawal Sleeve Supplier | Grease Speed Rating n1:5000 rpm; Sealed Speed Rating n3:3400 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; Oil Speed Rating n2:6000 rpm; Accessories:Two Seals; d:70.000 mm; Basic Static Radial Load Rating Co:45000 N; Basic Dynamic Radial Load Rating C:60500 N; D:125.0000 mm; |
| AH218 Withdrawal Sleeve 85x90x40mm | H2:61.913 mm; J min.:304.8 mm; J1:57.15 mm; Attachment bolt diameter G:19.05 mm; da:93.662 mm; A:114.3 mm; B:116.681 mm; Basic dynamic load rating C:311 kN; Mass bearing unit:22.9 kg; A1:133.35 mm; |
| AOH24092 (24092ECAK30/W33, 24092CCK, 24092CAK Bearing Withdrawal Sleeve) | r1,2 min.:0.2 mm; Lw:19.8 mm; Mass needle roller:0.49 g; Dw:2 mm; r1 max.:0.6 mm; r2 max.:0.8 mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
TMDT 2-39 High Temperature Wire Probe Video