| No. | Brand | J | F | f | T | A | s | S | r |
| 505300A5110ZAAAAP, | Danfoss | - | - | - | - | - | - | - | - |
| 821458 | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| NU2315-E-XL-M1A-C3 | fag | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| SL183030-C3 | INA | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 40X74X36 | - | - | - | - | - | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| UG223HL | Link-Belt | - | - | - | - | - | - | - | - |
| A4VG125 | Rexroth | - | - | - | - | - | - | - | - |
| 250 | - | - | - | - | - | 9 mm | - | - | - |
| 2FRM16-32/60L/J | Rexroth | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | - | - | - | - |
| NJ316 | NSK | - | - | - | - | - | - | - | - |
| 307PP | Nachi | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| RKS062 | SKF | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| TRC1018 Thrust Bearing Ring / Thrust Needle Bearing Washer 15.875x28.575x2.4mm | Speed Rating-Open and Shielded-Oil OSO:4000 rpm; D:170.0000 mm; Basic Radial Load Rating-Dynamic DC:138000 N; Width - Outer Ring B0:39.0 mm; Basic Radial Load Rating-Static SCO:129000 N; Speed Rating-Open and Shielded-Grease OSG:3300 rpm; Fillet Radius ra:2.00 mm; Accessories:300WI Filling Notch; Diameter E:109.0 mm; d:80.000 mm; |
| TRB2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x1.6mm | Limiting speed:1000 r/min; Calculation factor e:0.31; Basic static load rating C0:6800 kN; D1 ≈:498 mm; B1:225 mm; Fatigue load limit Pu:480 kN; D:580 mm; d1:320 mm; Reference speed:800 r/min; K:12 mm; |
| FTRC1831 Thrust Bearing Ring / Thrust Needle Bearing Washer 18x31x2mm | Weight:0.02 KGS; D:210mm; Seals or Shields:Open Type; Cage Type:Plastic; Clearance:C4; SKU:23028-e1-tvpb-c4-qbl; d:140mm; Availability:In Stock; B:53mm; |
| TRB3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x1.6mm | d:50.000 mm; Basic Dynamic Radial Load Rating:43600 N; Width C:27 mm; B:62.00 mm; D:110.0000 mm; Fillet Radius ra:2.00 mm; Grease or Oil Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:14000 N; |
| AOH3260G(23260CCK/W33, 23260CAK/W33, 23260CCK, 23260CAK Bearing Withdrawal Sleeve) | Ca:102.794 mm; L:558.8 mm; Initial grease fill:793.8 g; P120°:85.9 kN; Labyrinth ring:2 x LOR 116; A2:222.25 mm; da:111.125 mm; P180°:94.3 kN; A1:158.75 mm; PG:1/4 NPT; |
| TRC5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x2.4mm | Dynamic Load Rating (kN):195; Fatigue Load Rating (kN):6.55; Oil Limiting Speed (r/min):8500; Preload:Light; Availability:In Stock; SKU:7032cd/p4atbta-skf; Grease Limiting Speed (r/min):5600; B:38mm; d:160mm; D:240mm; |
| TRA613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x0.8mm | d:190mm; SKU:23038camke4c3-nsk; Dynamic Load Rating (kN):775; Availability:In Stock; Static Load Rating (kN):1350; Oil Limiting Speed (r/min):1400; D:290mm; Seals or Shields:Open Type; Weight:17.60 KGS; Clearance:C3; |
| 86458 / CR86458 Stainless Speedi Sleeve For Shaft Repair | R1:120.65 mm; L:711.2 mm; J min.:549.275 mm; P120°:107 kN; J max.:619.125 mm; N1:34.925 mm; Initial grease fill:1672.65 g; Mass pillow block:172 kg; A2:339.725 mm; P150°:94.3 kN; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
TMDT 2-36 Pipe Clamp Probe Video