| No. | Brand | J | F | f | T | A | s | S | r |
| 9W | - | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 30313A | - | - | - | - | - | - | - | - | - |
| 23122 | - | - | - | - | - | - | - | - | - |
| (VT215) | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 606ZZ | - | - | - | - | - | - | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| L650xw440xh345mm | - | - | - | - | - | - | - | - | - |
| ECHX01MI | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| Hm705 | - | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| (18mm, | - | - | - | - | - | 40 mm | - | - | - |
| 2 | - | - | - | - | - | 15 mm | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| A4VG125 | Rexroth | - | - | - | - | - | - | - | - |
| 99864 / CR99864 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Availability:In Stock; Dynamic Load Rating (kN):92.5; Seals or Shields:Open Type; Cage Type:Plastic; SKU:3mm218wicrdul-timken; Weight:2.20 KGS; D:160mm; d:90mm; B:30mm; |
| 99367 / CR99367 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:7500 rpm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30700 N; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:20400 N; d:25.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:10000 rpm; Grease Speed Rating n1:7500 rpm; B:25.40 mm; |
| AH3172H Withdrawal Sleeve Supplier | B:53.975mm; Weight:4.70 KGS; Availability:In Stock; Static Load Rating (kN):523; Dynamic Load Rating (kN):439; D:161.925mm; d:88.9mm; SKU:set-124-qbl; |
| FTRB1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x1.5mm | Fatigue Load Rating (kN):0.57; d:50mm; Reference Speed Rating (r/min):14000; SKU:2210ektn9-skf; Weight:0.02 KGS; Static Load Rating (kN):11.2; Limiting Speed Rating (r/min):9500; Availability:In Stock; Cage Type:Plastic; Dynamic Load Rating (kN):33.8; |
| CP46590 Thrust Plate 65x89.3x4mm | Static Load Rating (kN):50.5; SKU:7310beat85-nsk; B:27mm; Dynamic Load Rating (kN):74.5; d:50mm; Cage Type:Plastic; Clearance:Standard; Weight:1.12 KGS; Seals or Shields:Open Type; Availability:In Stock; |
| 99359 / CR99359 Stainless Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):20000; Weight:0.02 KGS; d:20mm; Reference Speed Rating (r/min):32000; B:14mm; Availability:In Stock; Static Load Rating (kN):3.4; Clearance:C3; Cage Type:Plastic; D:47mm; |
| 86631 / CR86631 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating n2:20000 rpm; D:32.0000 mm; Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:10400 N; B:15.9 mm; Basic Static Radial Load Rating Co:5600 N; D2R:30.2 mm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:15000 rpm; |
| CR99193 Stainless Steel Speedi Sleeve For Shaft Repair | PG:1/4 NPT; Mass pillow block:62.8 kg; Labyrinth ring:2 x LOR 108; H1:152.4 mm; P90°:113 kN; h:63.5 mm; Ca:89.789 mm; P120°:73.8 kN; da:98.425 mm; L:466.725 mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
CMAK 400-SL Basic Condition Monitoring Kit Video