| No. | Brand | J | F | f | T | A | s | S | r |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| 4WE10D32/OFCW110N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 21' | - | - | - | - | - | - | - | - | - |
| 20-5-52/100ym | Rexroth | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| 1648 | - | - | - | - | - | - | - | - | - |
| 1W | - | - | - | - | - | - | - | - | - |
| 7202BBTVP | fag | - | - | - | - | - | 14 mm | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 23948 | SKF | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| DAC40740036/34 | NTN | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 800 | NTN | - | - | - | - | - | - | - | - |
| 100lm | INA | - | - | - | - | - | - | - | - |
| N202-E-TVP2 | fag | - | - | - | - | - | - | - | - |
| 6900 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 50 | John Deere | - | - | - | - | - | - | - | - |
| HMV96E / HMV 96E Hydraulic Nut 482x612x77mm | B:38mm; Availability:In Stock; Cage Type:Steel; Clearance:Standard; D:4.33inch; d:60mm; Seals or Shields:Open Type; Weight:0.02 KGS; |
| 86631 / CR86631 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating n2:20000 rpm; D:32.0000 mm; Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:10400 N; B:15.9 mm; Basic Static Radial Load Rating Co:5600 N; D2R:30.2 mm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:15000 rpm; |
| CP21932 Thrust Plate 19x31.5x2mm | Availability:In Stock; SKU:60152rsc3-timken; Dynamic Load Rating (kN):40.1; Static Load Rating (kN):33.1; Reference Speed Rating (r/min):8700; Seals or Shields:Two Rubber Seals; Clearance:C3; Limiting Speed Rating (r/min):6000; B:20mm; Weight:0.65 KGS; |
| HMV17E / HMV 17E Hydraulic Nut (M85x2)x150x43mm | Clearance:Standard; Static Load Rating (kN):46; d:30mm; SKU:32006xa-ntn; Cage Type:Steel; D:55mm; Availability:In Stock; Oil Limiting Speed (r/min):9200; Dynamic Load Rating (kN):37.5; Seals or Shields:Open Type; |
| FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm | Lw:21.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:1.65 g; r1,2 min.:0.3 mm; Dw:3.5 mm; |
| CR99238 Stainless Steel Speedi Sleeve For Shaft Repair | Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:132000 N; D:250.0000 mm; d:180.000 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Basic Dynamic Radial Load Rating C:119000 N; Sealed Speed Rating n3:1500 rpm; Grease Speed Rating Open/Shielded n1:2200 rpm; B:33.00 mm; |
| 87783 / CR87783 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):310; Cage Type:Steel; Weight:0.02 KGS; Clearance:C3; Reference Speed Rating (r/min):4200; D:130mm; Availability:In Stock; B:46mm; d:60mm; SKU:22312-e1-k-c3-fag; |
| FTRB75100 Thrust Bearing Ring / Thrust Needle Bearing Washer 75x100x1.5mm | B:109mm; d:160mm; Availability:In Stock; Cage Type:Steel; Seals or Shields:Open Type; SKU:24132cck30/c3w33-qbl; Clearance:C3; D:270mm; Weight:0.02 KGS; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
LAHD 500 Oil Leveller Video