| No. | Brand | J | F | f | T | A | s | S | r |
| KC0 | - | - | - | - | - | - | - | 4.763 mm | - |
| 50% | INA | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 83-87 | koyo | - | - | - | - | - | - | - | - |
| PV-2-1144 | - | - | - | - | - | - | - | - | - |
| (5pcs) | - | - | - | - | - | - | - | - | - |
| 625 | NTN | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 4X8FT | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| 6315 | FAFNIR | - | - | - | - | - | - | - | - |
| 8x14x4mm | - | - | - | - | - | - | - | - | - |
| CR99122 Stainless Steel Speedi Sleeve For Shaft Repair | D:120mm; Static Load Rating (kN):41.5; B:23mm; d:65mm; Dynamic Load Rating (kN):60; Limiting Speed Rating (r/min):13000; Weight:1.00 KGS; Availability:In Stock; Reference Speed Rating (r/min):6300; Clearance:Standard; |
| 99625 / CR99625 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):4200; D:460mm; Cage Type:Steel; Weight:0.02 KGS; Availability:In Stock; Fatigue Load Rating (kN):315; SKU:23156-e1-c4-fag; B:146mm; Reference Speed Rating (r/min):810; Limiting Speed Rating (r/min):1400; |
| CR99276 Stainless Steel Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.173; d:25mm; Reference Speed Rating (r/min):46000; Seals or Shields:Two Rubber Seals; Cage Type:Plastic; Clearance:Standard; Limiting Speed Rating (r/min):70000; B:12mm; D:47mm; Dynamic Load Rating (kN):8.32; |
| 10 mm x 30 mm x 9 mm TRE1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x4mm | Dynamic Load Rating (kN):67.4; B:20mm; Seals or Shields:Open Type; D:62mm; Limiting Speed Rating (r/min):7800; Reference Speed Rating (r/min):9700; Clearance:Standard; Cage Type:Steel; Static Load Rating (kN):60.8; Weight:0.30 KGS; Size (mm):10 mm x 30 mm x 9 mm ; |
| 86737 / CR86737 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Clearance:Standard; SKU:2209k-2rstn-nsk; Static Load Rating (kN):8.15; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; Oil Limiting Speed (r/min):8500; Dynamic Load Rating (kN):23.3; D:85mm; Cage Type:Plastic; |
| AOHX32/600G ( 232/600CAK/W33, 232/600CAK, 232/600CCK Bearing Withdrawal Sleeve) | d:3 Inch; D:4.5 Inch; Seals or Shields:Open Type; Clearance:Standard; SKU:xls3-hoffmann; Weight:0.20 KGS; B:0.75 Inch; Availability:In Stock; |
| TRC512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x2.4mm | B:13mm; Cage Type:Steel; Static Load Rating (kN):5.4; Weight:0.09 KGS; Availability:In Stock; d:15mm; SKU:6302-rsr-c3-fag; Clearance:C3; Fatigue Load Rating (kN):0.35; Dynamic Load Rating (kN):11.4; |
| LAGG 18AE Grease Pump | Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating Open/Shielded n1:3100 rpm; Fillet Radius ra:2.50 mm; Accessories:Without Accessories; d:85.000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; B:41.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:147000 N; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Eccentric Bushing Video