| No. | Brand | J | F | f | T | A | s | S | r |
| 5/10/20 | - | 47.6 mm | - | - | - | - | - | - | - |
| ,I010 | - | - | - | - | - | - | - | - | - |
| 19 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| F6800ZZ | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 53mm | - | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| 35x80x31 | INA | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 481416 | Parker | - | - | - | - | - | - | - | - |
| 595 | - | - | - | - | - | - | - | - | - |
| 2-Way | - | - | - | - | - | - | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2019 | Danfoss | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| UCFC211 | NSK | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| VHIS 75 Bearing Induction Heater | Availability:In Stock; d:120mm; Cage Type:Steel; Clearance:Standard; B:80mm; Reference Speed Rating (r/min):1700; Limiting Speed Rating (r/min):1600; Static Load Rating (kN):1080; SKU:24124kejw33-timken; D:200mm; |
| CP1226 Thrust Plate 12x25.5x0.8mm | D:14mm; Cage Type:Steel; SKU:679-zen; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; B:3mm; d:9mm; Weight:0.20 KGS; |
| TMST 3 Electronic Stethoscope | F:10 mm; B:10 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0037 kg; d:6 mm; |
| HMV13E / HMV 13E Hydraulic Nut (M65x2)x130x43mm | Basic Dynamic Radial Load Rating C:6240 N; B:10.00 mm; Basic Static Radial Load Rating Co:3200 N; D:32.0000 mm; d:12.000 mm; Grease Speed Rating n1:22000 rpm; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:29000 rpm; Fillet Radius rb:0.30 mm; |
| TMDT 2-31 Magnetic Surface Probe | Clearance:C3; SKU:23140kembw33c3-timke; Reference Speed Rating (r/min):1400; B:112mm; Weight:40.70 KGS; d:200mm; D:340mm; Dynamic Load Rating (kN):1660; Static Load Rating (kN):2290; Availability:In Stock; |
| AH3240 Withdrawal Sleeve(matched Bearing:23240CAK, 23240CCK/W33) | Grease Speed Rating n1:8500 rpm; D:52.0000 mm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:22500 N; Basic Static Radial Load Rating Co:14600 N; B:22.20 mm; d:20.000 mm; Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; Accessories:Shield & Seal & Snap; |
| 90130 / CR90130 Stainless Speedi Sleeve For Shaft Repair | H2:155 mm; P120°:4000 kN; H1:460 mm; L:1330 mm; Ca:290 mm; P150°:3500 kN; da:440 mm; Locating ring:2 x FRB 5/790; N:70 mm; ATS:480 mm; |
| AH3156H Withdrawal Sleeve Supplier | Oil Limiting Speed (r/min):26000; Fatigue Load Rating (kN):0.62; B:13mm; Preload:Medium; SKU:71911cd/p4adgb-skf; Clearance:Standard; D:80mm; Weight:0.18 KGS; Availability:In Stock; Dynamic Load Rating (kN):19.5; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
AHX330 Withdrawal Sleeve 145x155x83mm Video