| No. | Brand | J | F | f | T | A | s | S | r |
| P315/P330 | Parker | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| NUP311 | NSK | - | - | - | - | - | - | - | - |
| #HR32207J | NSK | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| 4x8x3 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| CL2B-DA04B | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| VCL6P65A | Parker | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| (Zhv1) | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 6N1 | SKF | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| A4vg40ep4d1 | - | - | - | - | - | - | - | - | - |
| TIH L77/LV Bearing Induction Heater | Calculation factor X:0.67; Basic dynamic load rating C:41.5 kN; da min.:47 mm; B:18 mm; Calculation factor Y0:0.38; Da max.:73 mm; Calculation factor Y2:1.41; Fatigue load limit Pu:1.25 kN; r3,4 min.:0.6 mm; a:23 mm; |
| 1077600/SET Grease Gun | Fatigue load limit Pu:25 kN; da max.:145 mm; B:33 mm; s max.:4.7 mm; Basic dynamic load rating C:165 kN; Reference speed:3800 r/min; Da max.:191 mm; Limiting value e:0.2; r3,4 min.:1.1 mm; Limiting speed:5600 r/min; |
| AH2308 Withdrawal Sleeve (22308EK Bearing) | r2 min.:1.1 mm; Lubricant:Regular relubricatio; M:8 mm; Basic dynamic load rating C:1120 kN; rb max.:1.1 mm; Da min.:157 mm; Specific static load factor K0:300 N/mm²; da max.:124.5 mm; b1:10 mm; ra max.:2 mm; |
| CR99085 Stainless Steel Speedi Sleeve For Shaft Repair | d:40mm; Cage Type:Steel; Dynamic Load Rating (kN):103; Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):188; Grease Limiting Speed (r/min):1700; Oil Limiting Speed (r/min):2600; D:90mm; B:36mm; |
| AS2542 Thrust Needle Roller Bearing Washer 25x42x1mm | Availability:In Stock; B:2.5mm; d:8mm; Seals or Shields:Open Type; SKU:mr128-zen; D:12mm; Clearance:Standard; Weight:0.20 KGS; Cage Type:Steel; |
| CP7140180 Thrust Plate 140x178.7x7mm | SKU:2212e-2rs1tn9-skf; D:110mm; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):31.2; Static Load Rating (kN):12.2; Availability:In Stock; Limiting Speed Rating (r/min):3800; Fatigue Load Rating (kN):0.62; B:28mm; Weight:0.02 KGS; |
| CR99134 Stainless Steel Speedi Sleeve For Shaft Repair | Cage Type:Steel; Availability:In Stock; B:18mm; d:40mm; SKU:6208-z-fag; Limiting Speed Rating (r/min):8500; D:80mm; Seals or Shields:Single Metal Shield; Reference Speed Rating (r/min):9300; Clearance:Standard; |
| 87914 / CR87914 Stainless Speedi Sleeve For Shaft Repair | D:400mm; SKU:23148-e1-k-qbl; Availability:In Stock; B:128mm; Clearance:Standard; Seals or Shields:Open Type; Weight:0.02 KGS; d:240mm; Cage Type:Steel; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
AH328 Withdrawal Sleeve 135x140x77mm Video