| AHX3122 Withdrawal Sleeve(matched Bearing:2222K, 23122CCK/W33, 22222EK, C3022K, C2222K) | d:9.000 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; Accessories:Two Shields; Fillet Radius ra:0.64 mm; B:8.00 mm; Sealed Speed Rating n3:20000 rpm; Grease Speed Rating Open/Shielded n1:28000 rpm; D:26.0000 mm; Basic Dynamic Radial Load Rating C:4620 N; Basic Static Radial Load Rating Co:1960 N; |
| AH3052 Withdrawal Sleeve 240x260x128mm | d:55.000 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:153000 N; D:140.0000 mm; B:66.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| 85931 / CR85931 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; D:68mm; Weight:0.26 KGS; Clearance:Standard; d:40mm; Reference Speed Rating (r/min):6300; Cage Type:Steel; B:21mm; Static Load Rating (kN):11.6; SKU:63008-2rsr-fag; |
| AOH241/800G (241/800ECAK30/W33, 241/800CAK, 241/800CCK Bearing Withdrawal Sleeve) | Cage Type:Plastic; Static Load Rating (kN):38.7; d:40mm; SKU:3mm208wicrsum-timken; Weight:0.35 KGS; Dynamic Load Rating (kN):22.7; Availability:In Stock; Clearance:Standard; Speed Rating (r/min):17400; B:18mm; |
| AOH241/1000 (241/1000ECAK30/W33, 241/1000ECAK, 241/1000CCK, 241/1000CCK/W33 Bearing Withdrawal Sleeve) | rb max.:6 mm; Design (sliding contact surface combination):Steel/PTFE fabric; Mass plain bearing:593 kg; da max.:722 mm; Basic static load rating C0:91500 kN; dk:785 mm; ra max.:3 mm; Specific dynamic load factor K:300 N/mm²; r1 min.:3 mm; B:308 mm; |
| AH3236G Withdrawal Sleeve(matched Bearing:23236CAK,23236CCK,23236CCK/W33, C3236K) | SKU:1205j-qbl; d:25mm; Availability:In Stock; Seals or Shields:Open Type; Weight:0.02 KGS; D:52mm; B:15mm; Cage Type:Steel; Clearance:Standard; |
| Tapered Roller Bearings33019-xl 95X145X39MM | Clearance:Standard; Dynamic Load Rating (kN):306; B:46mm; Limiting Speed Rating (r/min):4000; SKU:22312kejw33-timken; d:60mm; Cage Type:Steel; Weight:3.00 KGS; Availability:In Stock; Seals or Shields:Open Type; |
| 99311 / CR99311 Stainless Speedi Sleeve For Shaft Repair | Operating clearance factor k2:0.101; B:230 mm; d:670 mm; D:980 mm; D1 ≈:905 mm; Mass bearing:590 kg; Da max.:952 mm; Misalignment factor k1:0.121; Ca min.:2.9 mm; d2 ≈:775 mm; |