| No. | Brand | J | F | f | T | A | s | S | r |
| 6309ZZ | NTN | - | - | - | - | - | - | - | - |
| Hm705 | - | - | - | - | - | - | - | - | - |
| SL01 | - | - | - | - | - | - | - | - | - |
| 2015 | - | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 10.9 | - | - | - | - | - | - | - | - | - |
| 2500W | - | - | - | - | - | - | - | - | - |
| 10'' | - | - | - | - | - | - | - | - | - |
| 25909 | - | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| 6213-MA-P6-C3 | fag | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 6N1 | SKF | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| YF0-81530-62-03 | - | - | - | - | 279.4 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| ZX200 | - | - | - | - | - | - | - | - | - |
| GS905 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 4WE10D32/OFCW110N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| GS2068 | - | - | - | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| TRE1625 Thrust Bearing Ring / Thrust Needle Bearing Washer 25.4x39.675x4mm | B:28.00 mm; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:83000 N; d:85.000 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:90400 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4900 rpm; Fillet Radius rb:1.00 mm; |
| MSR22x1.5 Precision Locknut / MSR-M22x1.5 Locking Nut (M22x1.5)x40x18mm | Weight:0.02 KGS; B:23mm; D:72mm; Cage Type:Steel; SKU:22207-e1-k-qbl; d:35mm; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; |
| 90805 / CR90805 Stainless Speedi Sleeve For Shaft Repair | D:480 mm; d:360 mm; Axial load factor Y:0.6; Da max.:465 mm; db min.:392 mm; Basic static load rating C0:1460 kN; Calculation factor kr:0.1; Limiting speed:2000 r/min; D1 ≈:438 mm; Reference speed:1400 r/min; |
| 84263 / CR84263 Stainless Speedi Sleeve For Shaft Repair | B:36 mm; H:171.5 mm; J7:16 mm; B4:7 mm; Da:88.9 mm; R1:24.5 mm; Basic static load rating C0:19 kN; Rα:45 °; Bearing:YAT 208-108; Housing material:Cast iron; |
| AH222 Withdrawal Sleeve 105x110x50mm | Weight W:1.37 lb; Distance JMIN:4.6875 in; Basic Dynamic Radial Load Rating:4560 lbf; Distance JMAX:5.2500 in; Dimension N1:0.5469 in; Height H:3.6563 in; Dimension S1:1.0000 in; Dimension A1:1.0625 in; Width A:1.7656 in; Insert Bearing IB:Stainless Steel; |
| 87462 / CR87462 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):90; SKU:4216-b-tvh-fag; Weight:2.14 KGS; d:80mm; Availability:In Stock; Seals or Shields:Open Type; Limiting Speed Rating (r/min):4000; Clearance:Standard; Cage Type:Plastic; B:33mm; |
| CR99811 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Reference Speed Rating (r/min):6700; Limiting Speed Rating (r/min):4800; Fatigue Load Rating (kN):2.28; Availability:In Stock; D:180mm; d:85mm; Clearance:Standard; Dynamic Load Rating (kN):140; Seals or Shields:Open Type; |
| CR99275 Stainless Steel Speedi Sleeve For Shaft Repair | B:84.00 mm; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:255000 N; Oil Speed Rating n2:3400 rpm; d:70.000 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:260000 N; Fillet Radius rb:1.00 mm; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AH312 Withdrawal Sleeve 55x60x40mm Video