| No. | Brand | J | F | f | T | A | s | S | r |
| 30X55X32 | - | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 6212LLB/2A, | NTN | - | - | - | - | - | - | - | - |
| 7310BDY | SKF | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - | - |
| R0632-025-00 | Rexroth | - | - | - | - | - | - | - | - |
| BMP50/OMP50 | - | - | - | - | - | - | - | - | - |
| 1 | Parker | - | - | - | - | - | - | - | - |
| 100W/300W | - | - | - | - | - | - | - | - | - |
| 27pc | - | - | - | - | - | - | - | - | - |
| Hm705 | - | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| DH650 | - | - | - | - | - | - | - | - | - |
| 2258 | - | - | - | - | - | - | - | - | - |
| 8-10 | - | - | - | - | - | - | - | - | - |
| XM1 | TOKIMEC | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 20 | SKF | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 2500W | - | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 6001-ZZ | - | - | - | - | - | - | - | - | - |
| 26n | - | - | - | - | - | - | - | - | - |
| Ni200/201pure | - | - | - | - | - | - | - | - | - |
| AH3060 Withdrawal Sleeve 280x300x145mm | Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:14000 N; d:25.000 mm; Fillet Radius ra:1.00 mm; Accessories:Shield & Seal & Snap; B:22.20 mm; Grease Speed Rating n1:8000 rpm; Basic Dynamic Radial Load Rating C:20800 N; Sealed Speed Rating n3:8000 rpm; D:52.0000 mm; |
| 99300 / CR99300 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:1.50 mm; d:35.000 mm; D:100.0000 mm; B:25.00 mm; Basic Static Radial Load Rating Co:31000 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Accessories:Snap-Ring; Sealed Speed Rating n3:4900 rpm; Grease Speed Rating Open/Shielded n1:7000 rpm; Basic Dynamic Radial Load Rating C:55300 N; |
| TRD2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x3.2mm | ra max.:4 mm; Reference speed:110 r/min; da min.:1284 mm; Minimum axial load factor A:140; Basic dynamic load rating C:6000 kN; Basic static load rating C0:41500 kN; Limiting speed:220 r/min; H:160 mm; Mass bearing:410 kg; d1:1314 mm; |
| Eccentric Bushing | Fillet Radius ra:2.00 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:106000 N; Oil Speed Rating n2:6000 rpm; Basic Dynamic Radial Load Rating C:121000 N; Fillet Radius rb:1.00 mm; B:54.00 mm; d:50.000 mm; Grease Speed Rating n1:4600 rpm; |
| FTRB1528 Thrust Bearing Ring / Thrust Needle Bearing Washer 15x28x1.5mm | Availability:In Stock; Seals or Shields:Open Type; Limiting Speed Rating (r/min):3800; B:37mm; Static Load Rating (kN):255; d:240mm; Reference Speed Rating (r/min):2100; Weight:12.70 KGS; SKU:16048-c3-fag; D:360mm; |
| HMV28E / HMV 28E Hydraulic Nut (M140x2)x208x45mm | Weight:1.45 KGS; Static Load Rating (kN):57; Seals or Shields:Open Type; Limiting Speed Rating (r/min):5000; Dynamic Load Rating (kN):60.5; B:19mm; Cage Type:Steel; d:110mm; Availability:In Stock; Fatigue Load Rating (kN):2.04; |
| CP1326 Thrust Plate 13x25.5x0.8mm | Clearance:C3; Dynamic Load Rating (kN):950; Seals or Shields:Open Type; Weight:0.02 KGS; Reference Speed Rating (r/min):2130; Static Load Rating (kN):1070; D:240mm; SKU:22322-e1a-k-m-c3-fag; Limiting Speed Rating (r/min):2600; Availability:In Stock; |
| TRC2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x2.4mm | d:55mm; Availability:In Stock; Dynamic Load Rating (kN):43.4; Seals or Shields:Two Metal Shields; Cage Type:Steel; Limiting Speed Rating (r/min):6300; Weight:0.02 KGS; B:21mm; Static Load Rating (kN):29.4; D:100mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
AH30/900 Withdrawal Sleeve 850x900x335mm Video