| No. | Brand | J | F | f | T | A | s | S | r |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 801234-AAA-NR | Parker | - | - | - | - | - | - | - | - |
| 23076 | - | - | - | - | - | - | - | - | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| [2 | - | - | - | - | - | - | - | - | - |
| 8'1" | - | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| N3058 | - | - | - | - | - | - | - | - | - |
| 10W | - | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 110A-036-AS-0, | Parker | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 33205 | Timken | - | - | - | - | - | - | - | - |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | 3.175 mm | - |
| 25kg/Bag | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| CR99250 Stainless Steel Speedi Sleeve For Shaft Repair | P90°:94.3 kN; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; P60°:157 kN; Bearing:22218 EK; End plug (suffix Y):EPR 11; N1:19.05 mm; P120°:59.6 kN; H1:101.6 mm; L:349.25 mm; |
| TMDT 2-39 High Temperature Wire Probe | Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:C3; B:43mm; d:55mm; Cage Type:Plastic; Availability:In Stock; D:120mm; SKU:2311tnc3-qbl; |
| ZM130 Precision Locknut (M130x2)x165x24mm | SKU:22213kemw33-timken; d:65mm; Static Load Rating (kN):204; Dynamic Load Rating (kN):198; Availability:In Stock; Weight:1.60 KGS; B:31mm; Clearance:Standard; D:120mm; Cage Type:Brass; |
| 99311 / CR99311 Stainless Speedi Sleeve For Shaft Repair | Operating clearance factor k2:0.101; B:230 mm; d:670 mm; D:980 mm; D1 ≈:905 mm; Mass bearing:590 kg; Da max.:952 mm; Misalignment factor k1:0.121; Ca min.:2.9 mm; d2 ≈:775 mm; |
| CR99114 Stainless Steel Speedi Sleeve For Shaft Repair | R1:31.75 mm; Stabilizing ring:SR-10-8; L:209.55 mm; N1:15.875 mm; J min.:165.1 mm; Ca:42.799 mm; P120°:12.5 kN; Housing:SAF 308; Da:90 mm; PG:1/8 NPT; |
| CR99819 Stainless Steel Speedi Sleeve For Shaft Repair | Housing:SAFS 217; L:330.2 mm; H2:38.1 mm; Bearing:22217 E; Lock washer:W 17; dc:80.963 mm; PG:1/8 NPT; P150°:26.7 kN; P120°:28.9 kN; Stabilizing ring:SR-17-14; |
| AH2334,AH2334G Withdrawal Sleeve(matched Bearing:22334CAK/W33,22334CCK/W33) | d:320mm; Static Load Rating (kN):5950; Clearance:C3; Reference Speed Rating (r/min):690; Weight:160.50 KGS; D:540mm; Cage Type:Steel; Availability:In Stock; B:176mm; Seals or Shields:Open Type; |
| 99306 / CR99306 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:4300 rpm; B:13.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:16000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; d:65.000 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:17400 N; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
AH30/850 Withdrawal Sleeve 800x850x325mm Video