| No. | Brand | J | F | f | T | A | s | S | r |
| 6W | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| F-150 | NSK | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| [50pcs] | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| 9234004 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| 180 | - | - | - | - | - | - | - | - | - |
| E0e1e2 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| 16-16-16 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| 23128E1AXLMC4 | fag | - | - | - | - | - | - | - | - |
| PGH4 | Rexroth | - | - | - | - | - | - | - | - |
| AS90120 Thrust Needle Roller Bearing Washer 90x120x1mm | Lock washer / Locking clip:MS 30/600-530; b:40 mm; Associated spanner:TMFN 500-600; d3:630 mm; d2:558 mm; Mass lock nut:45.8 kg; d1:590 mm; G:Tr 530x6; B5:90 mm; h:20 mm; |
| TMDT 2-33 Right Angle Surface Probe | Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; B:8mm; Clearance:Standard; d:12mm; Static Load Rating (kN):6.4; SKU:2mm9101wicrdum-timke; Speed Rating (r/min):57300; Dynamic Load Rating (kN):2.9; |
| CR99838 Stainless Steel Speedi Sleeve For Shaft Repair | Reference speed:240 r/min; Limiting speed:450 r/min; Mass bearing:810 kg; d:800 mm; B1:222 mm; Minimum axial load factor A:290; Basic dynamic load rating C:11300 kN; B:78 mm; Fatigue load limit Pu:3900 kN; D:1180 mm; |
| 85039 / CR85039 Stainless Speedi Sleeve For Shaft Repair | da max.:41 mm; rb max.:1.3 mm; a:13.416 mm; Cb min.:3.5 mm; Basic static load rating C0:44 kN; d:34.987 mm; Da min.:52 mm; db min.:47 mm; Da max.:53 mm; Reference speed:9000 r/min; |
| ZM70 Precision Locknut (M70x2)x92x18mm | Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Accessories:No Shield, no Seal; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:14000 rpm; Oil Speed Rating n2:18000 rpm; Basic Dynamic Radial Load Rating C:11700 N; Basic Static Radial Load Rating Co:6800 N; d:12.000 mm; B:19.1 mm; |
| CR99250 Stainless Steel Speedi Sleeve For Shaft Repair | P90°:94.3 kN; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; P60°:157 kN; Bearing:22218 EK; End plug (suffix Y):EPR 11; N1:19.05 mm; P120°:59.6 kN; H1:101.6 mm; L:349.25 mm; |
| CR99182 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):2000; Limiting Speed Rating (r/min):1300; Seals or Shields:Open Type; D:300mm; d:180mm; Clearance:C3; Cage Type:Brass; B:96mm; Weight:27.60 KGS; Dynamic Load Rating (kN):1410; |
| AH3034 Withdrawal Sleeve(matched Bearing:23034CCK/W33, C3034K) | B:27.00 mm; Basic Static Radial Load Rating Co:20400 N; D:62.0000 mm; Basic Dynamic Radial Load Rating C:28600 N; Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:7000 rpm; Sealed Speed Rating n3:7000 rpm; d:30.000 mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
AH30/530 Withdrawal Sleeve 500x530x242mm Video