| No. | Brand | J | F | f | T | A | s | S | r |
| 1pcs | - | - | - | - | - | - | - | - | - |
| 24lbs | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| MU1012L | Bower | - | - | - | - | - | - | - | - |
| EX60 | - | - | - | - | - | - | - | - | - |
| 6204ETN9 | SKF | - | - | - | 47.1 mm | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| Rhb306 | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| 307PP | Nachi | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| Ve9 | - | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| 6310ZZC3 | - | - | - | - | - | - | - | - | - |
| GS2068 | - | - | - | - | - | - | - | - | - |
| BMP50/OMP50 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| 4074 | - | - | - | - | - | - | - | - | - |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| (CC24SC, | INA | - | - | - | - | - | - | - | - |
| AOH241/850 (241/850CAK, 241/850CCK,241/850CCK/W33, 241/850ECAK30/W33 Bearing Withdrawal Sleeve) | J1:160 mm; Da:420 mm; Mass housing:221 kg; da:260 mm; P55°:4700 kN; Q120°:2860 kN; N4 max.:20 mm; Appropriate attachment bolt, size G:36 mm; Locating ring:6 x FRB 10/420; P180°:1900 kN; |
| CPR875135 Thrust Plate 75x135x8mm | Clearance:C3; Availability:In Stock; d:12mm; Weight:0.02 KGS; B:10mm; SKU:1201jc3-qbl; Seals or Shields:Open Type; Cage Type:Steel; D:32mm; |
| CR99156 Stainless Steel Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):8500; D:52mm; Dynamic Load Rating (kN):21.6; SKU:3205a-2rs1tn9/mt33-s; Clearance:Standard; Cage Type:Plastic; Fatigue Load Rating (kN):0.6; d:25mm; B:20.6mm; Availability:In Stock; |
| CR99243 Stainless Steel Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.047; SKU:61803-2z-fag; Dynamic Load Rating (kN):1.77; Static Load Rating (kN):0.93; Seals or Shields:Two Metal Shields; d:17mm; Availability:In Stock; Cage Type:Steel; Reference Speed Rating (r/min):17200; B:5mm; |
| TRD1828 Thrust Bearing Ring / Thrust Needle Bearing Washer 28.575x44.45x3.2mm | Fillet Radius ra:2.50 mm; B:90.00 mm; Fillet Radius rb:1.00 mm; D:190.0000 mm; Basic Static Radial Load Rating Co:335000 N; Oil Speed Rating n2:3400 rpm; d:75.000 mm; Grease Speed Rating n1:2900 rpm; Basic Dynamic Radial Load Rating C:270000 N; |
| AOH241/530G (241/530CAK, 241/530CCK, 241/530ECAK30/W33 Bearing Withdrawl Sleeve) | Grease Speed Rating n1:5000 rpm; Sealed Speed Rating n3:5000 rpm; B:39.70 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:67100 N; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.50 mm; Accessories:Shield & Seal; d:40.000 mm; Basic Static Radial Load Rating Co:65500 N; |
| AH3232G Withdrawal Sleeve(matched Bearing:23232CCK/W33, C3232K) | Weight:8.30 KGS; Reference Speed Rating (r/min):3400; Clearance:C4; SKU:22318ejw33w800c4-tim; Availability:In Stock; Cage Type:Steel; Static Load Rating (kN):659; Seals or Shields:Open Type; Limiting Speed Rating (r/min):2900; d:90mm; |
| AH2338G Withdrawal Sleeve(matched Bearing:22338CCK, 22338CAK, 22338CCK/W33) | Seals or Shields:Two Metal Shields; Static Load Rating (kN):58.5; B:36.5mm; Availability:In Stock; Limiting Speed Rating (r/min):5600; Fatigue Load Rating (kN):2.5; Weight:0.02 KGS; Dynamic Load Rating (kN):73.5; Cage Type:Steel; Clearance:C3; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AHX3088 Withdrawal Sleeve 420x440x194mm Video