| No. | Brand | J | F | f | T | A | s | S | r |
| X90 | - | - | - | - | - | - | - | - | - |
| 5-Pack | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 201 | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 5.8g | - | - | - | - | - | - | - | - | - |
| 6900 | - | - | - | - | - | - | - | - | - |
| PS411155ACP | Parker | - | - | - | - | - | - | - | - |
| CH-47914 | - | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | 2.5 mm | - |
| 8301-023-OMR | Parker | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 10W/12W | - | - | - | - | - | - | - | - | - |
| TRB4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x1.6mm | D:80mm; B:34.9mm; SKU:3307bnrtnc3-nsk; Static Load Rating (kN):33200; d:35mm; Seals or Shields:Open Type; Weight:0.82 KGS; Cage Type:Plastic; Dynamic Load Rating (kN):51200; Oil Limiting Speed (r/min):6500; |
| AOH24180(24180ECCK30/W33, 24180CCK, 24180CAK Bearing Withdrawal Sleeve) | Clearance:Standard; Weight:0.20 KGS; D:3.313 inch; d:2 inch; B:0.625 inch; Seals or Shields:Open Type; SKU:xlj2-r&m; Availability:In Stock; |
| 99293 / CR99293 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:30mm; Clearance:Standard; Grease Limiting Speed (r/min):22000; Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):1.19; SKU:1200j-nsk; Dynamic Load Rating (kN):5.55; Oil Limiting Speed (r/min):28000; |
| Cylindrical Roller Bearings NU336-E-XL-TVP2 180x380x75mm | Da:289.999 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:5; PG:1/4 NPT; L:558.8 mm; J max.:488.95 mm; J min.:441.325 mm; Cap bolt:4 x 3/4-10 UNC; P60°:226 kN; Max. speed for Taconite seal:560 r/min; |
| CR99059 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):9.58; Speed Rating (r/min):47800; D:35mm; Cage Type:Plastic; Availability:In Stock; Seals or Shields:Open Type; Weight:0.04 KGS; SKU:2mm202wicrsul-timken; B:11mm; Dynamic Load Rating (kN):4.5; |
| CP7180225 Thrust Plate 180x223.5x7mm | Clearance:C3; SKU:6216c3-nsk; Oil Limiting Speed (r/min):5300; Dynamic Load Rating (kN):72.5; Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):53; d:80mm; Availability:In Stock; D:140mm; |
| CPR15160270 Thrust Plate 160x270x15mm | Fatigue load limit Pu:1930 kN; D1:1066 mm; Reference speed:120 r/min; ra max.:4 mm; r1,2 min.:5 mm; Da max.:1095 mm; B:45 mm; D:1250 mm; Limiting speed:240 r/min; Basic static load rating C0:36500 kN; |
| CPR42552 Thrust Plate 25x52x4mm | Static Load Rating (kN):86.5; Dynamic Load Rating (kN):122; Fatigue Load Rating (kN):5.2; Clearance:Standard; Availability:In Stock; D:170mm; Limiting Speed Rating (r/min):2600; B:39mm; Cage Type:Steel; SKU:6316-2rsr-fag; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AH3034 Withdrawal Sleeve 160x170x85mm Video