| No. | Brand | J | F | f | T | A | s | S | r |
| 6 | - | - | - | - | - | - | - | - | - |
| CL2B-DA04B | - | - | - | - | - | - | - | - | - |
| 500tph | - | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| 6303ZZ | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| (F01,F02,F04,F06,F07,F10,F13) | - | - | - | - | - | - | - | - | - |
| 12/15/16/17/18/19mm | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| [5 | - | - | - | - | - | - | - | - | - |
| 22314CDE4 | NSK | - | - | - | - | - | - | - | - |
| 6219-2Z/C3 | - | - | - | - | - | - | - | - | - |
| 90lm/W | - | - | - | - | - | - | - | - | - |
| Catsbs80 | - | - | - | - | - | - | - | - | - |
| 6N1 | SKF | - | - | - | - | - | - | - | - |
| HK1015 | - | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| 5202-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 20 | SKF | - | - | - | - | - | - | - | - |
| (22X28X16) | - | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| AOHX32/500G (232/500CAK/W33, 232/500CAK, 232/500CCK Bearing Withdrawal Sleeve) | Clearance:C4; Weight:6.60 KGS; B:60.3mm; Seals or Shields:Open Type; Cage Type:Steel; SKU:23220ce4c4-nsk; d:100mm; Oil Limiting Speed (r/min):2200; D:180mm; Dynamic Load Rating (kN):420; |
| 99315 / CR99315 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):2.85; SKU:6002-2rsh/c3gjn-skf; Weight:0.02 KGS; Cage Type:Steel; Limiting Speed Rating (r/min):15000; D:32mm; Seals or Shields:Two Rubber Seals; Condition:New; B:9mm; Clearance:C3; |
| CR99810 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Cage Type:Steel; d:34.925mm; Fatigue Load Rating (kN):15.7; Dynamic Load Rating (kN):109; Static Load Rating (kN):105; B:29.37mm; Availability:In Stock; Oil Limiting Speed (r/min):6900; Seals or Shields:Open Type; |
| MSR50x1.5 Precision Locknut / MSR-M50x1.5 Locking Nut (M50x1.5)x70x25mm | Static Load Rating (kN):38; Clearance:Standard; SKU:1317j-nsk; Grease Limiting Speed (r/min):3400; Dynamic Load Rating (kN):98.5; Weight:0.02 KGS; D:180mm; B:41mm; d:85mm; Availability:In Stock; |
| 85852 / CR85852 Stainless Speedi Sleeve For Shaft Repair | D:35mm; Cage Type:Steel; d:10mm; Availability:In Stock; Clearance:Standard; B:17mm; Seals or Shields:Two Rubber Seals; Weight:0.06 KGS; Fatigue Load Rating (kN):0.143; Limiting Speed Rating (r/min):15000; |
| 87916 / CR87916 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Fatigue Load Rating (kN):1.32; Static Load Rating (kN):31; d:70mm; Clearance:C3; SKU:6014-2rs1/c3-skf; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):3600; Dynamic Load Rating (kN):39.7; Weight:0.02 KGS; |
| CR99828 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bearing:67 kg; Basic dynamic load rating C:1340 kN; T:80.963 mm; Calculation factor e:0.37; Da max.:660 mm; D:692.15 mm; r1,2 min.:6.4 mm; C:61.913 mm; Ca min.:13 mm; Da min.:646 mm; |
| AOH241/950 (241/950CAK30/W33, 241/950CAK, 241/950CCK, 241/950CCK/W33 Bearing Withdrawal Sleeve) | Limiting Speed Rating (r/min):1300; D:280mm; Dynamic Load Rating (kN):1320; d:180mm; Seals or Shields:Open Type; Static Load Rating (kN):2040; B:100mm; Reference Speed Rating (r/min):1500; Weight:22.60 KGS; Cage Type:Steel; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
AH236 Withdrawal Sleeve 170x180x69mm Video