| No. | Brand | J | F | f | T | A | s | S | r |
| 200W | - | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| (CF-05) | - | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 10W/12W | - | - | - | - | - | - | - | - | - |
| 21310 | fag | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 1040T | Rexnord | - | - | - | - | - | - | - | - |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 10-30 | - | - | - | - | - | - | - | - | - |
| 6304-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 30X42X7 | - | - | - | - | - | - | - | - | - |
| 85367 / CR85367 Stainless Speedi Sleeve For Shaft Repair | Grease Speed Rating n1:2600 rpm; Fillet Radius rb:1.00 mm; d:110.000 mm; Basic Static Radial Load Rating Co:156000 N; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.00 mm; D:200.0000 mm; B:38.00 mm; |
| AHX3122 Withdrawal Sleeve(matched Bearing:2222K, 23122CCK/W33, 22222EK, C3022K, C2222K) | d:9.000 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; Accessories:Two Shields; Fillet Radius ra:0.64 mm; B:8.00 mm; Sealed Speed Rating n3:20000 rpm; Grease Speed Rating Open/Shielded n1:28000 rpm; D:26.0000 mm; Basic Dynamic Radial Load Rating C:4620 N; Basic Static Radial Load Rating Co:1960 N; |
| 99298 / CR99298 Stainless Speedi Sleeve For Shaft Repair | D:80mm; Availability:In Stock; B:31mm; d:35mm; Static Load Rating (kN):11.1; Cage Type:Plastic; SKU:2307-tvh-fag; Dynamic Load Rating (kN):40.5; Limiting Speed Rating (r/min):9000; Fatigue Load Rating (kN):0.69; |
| ZM35 Precision Locknut (M35x1.5)x52x12mm | Grease Limiting Speed (r/min):6000; SKU:22208eae4-nsk; d:40mm; Availability:In Stock; B:23mm; Cage Type:Steel; Oil Limiting Speed (r/min):7500; D:80mm; Dynamic Load Rating (kN):90.5; Weight:0.50 KGS; |
| MSR26x1.5 Precision Locknut / MSR-M26x1.5 Locking Nut (M26x1.5)x45x20mm | d:6.400 mm; Basic Dynamic Radial Load Rating C:1480 N; Oil Speed Rating Open/Shielded n2:54000 rpm; Shielded or Sealed B1:5.0 mm; D:15.9000 mm; Basic Static Radial Load Rating Co:620 N; Accessories:Two Shields; Width Plain B:5.0 mm; Sealed Speed Rating n3:31000 rpm; Fillet Radius ra:0.30 mm; |
| 99853 / CR99853 Stainless Speedi Sleeve For Shaft Repair | Material constant KM:330; Basic static load rating C0:23.5 kN; d2 max.:45 mm; B:16 mm; l3 min.:17 mm; N max.:45 mm; Tightening torque bolt with internal hexagon:10 N·m; C1 max.:11 mm; α:10 °; h1:48 mm; |
| TRC4458 Thrust Bearing Ring / Thrust Needle Bearing Washer 69.85x92.075x2.4mm | Cage Type:Steel; Clearance:Standard; d:30mm; Weight:0.02 KGS; D:72mm; SKU:3306a-qbl; Seals or Shields:Open Type; Availability:In Stock; B:30.2mm; |
| FTRE3552 Thrust Bearing Ring / Thrust Needle Bearing Washer 35x52x3mm | End cover:ETS 72; Locating ring:6 x FRB 10/480; Eye bolt, size:2 x M 30; H2:110 mm; Lock washer:MS 3068-64; P55°:6000 kN; L:830 mm; bb:115.5 mm; Bearing (basic designation):23064; Appropriate attachment bolt, rec. tightening torque:2280 N·m; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AH228 Withdrawal Sleeve 135x140x56mm Video