| No. | Brand | J | F | f | T | A | s | S | r |
| 99.5% | - | - | - | - | - | - | - | - | - |
| PC120-5 | Komatsu | - | - | - | - | - | - | - | - |
| 12W | - | - | - | - | - | - | - | - | - |
| 200 | NTN | - | - | - | - | - | - | - | - |
| 6005ZZENR | Nachi | - | - | - | - | - | - | - | - |
| 5] | - | - | - | - | - | - | - | - | - |
| 3mm/3.6mm/5mm | - | - | - | - | - | - | - | - | - |
| 2 | Thomson | - | - | - | - | - | - | - | - |
| 480W | - | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| RS25 | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| UC209D1 | NSK | - | - | - | - | - | - | - | - |
| 4WE6D53/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| SR45TB1SS | thk | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 52Pcs | - | - | - | - | - | - | - | - | - |
| AOH24196 (24196ECAK30/W33, 24196CAK, 24196CCK Bearing Withdrawal Sleeve) | Coefficient of friction µ max.:0.15; d:14 mm; Specific static load factor K0:45 N/mm²; a:3 mm; D:20 mm; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:0.025 kg; Tolerance shaft:e7; h:15 mm; |
| ZM12 Precision Locknut (M12x1)x22x8mm | D:215mm; Weight:5.16 KGS; d:120mm; Cage Type:Steel; Clearance:Standard; Limiting Speed Rating (r/min):4000; Availability:In Stock; Reference Speed Rating (r/min):5700; Dynamic Load Rating (kN):155.3; B:40mm; |
| HMV110E / HMV 110E Hydraulic Nut 552x693x83mm | G:M 40x1.5; Axial static load carrying capacity:62 kN; B:13 mm; h:2.5 mm; b:6 mm; Associated spanner:HN 8-9; B3:3 mm; Recommended grub screw tightening torque:8 N·m; d1:47.5 mm; d3:58 mm; |
| FTRD5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x2.5mm | Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:143000 N; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:134000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; B:57.20 mm; d:60.000 mm; |
| 84390 / CR84390 Stainless Speedi Sleeve For Shaft Repair | End plug (suffix Y):X-5217-4; P120°:207 kN; Taconite seal:TER 552; ba:89.694 mm; Housing:SAFS 048 KA; A1:203.2 mm; H1:209.55 mm; h:56.356 mm; Cap bolt, SAE grade:8; Da:359.999 mm; |
| 85038 / CR85038 Stainless Speedi Sleeve For Shaft Repair | SKU:2313k-qbl; B:48mm; Cage Type:Steel; Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:Standard; D:140mm; Availability:In Stock; d:65mm; |
| CR99129 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Fatigue Load Rating (kN):88; Clearance:Standard; Static Load Rating (kN):1010; Dynamic Load Rating (kN):760; D:225mm; Reference Speed Rating (r/min):1930; Limiting Speed Rating (r/min):2800; Cage Type:Plastic; Weight:0.02 KGS; |
| AHX3224G Withdrawal Sleeve(matched Bearing:23224CCK/W33, C3224K) | Shielded or Sealed B1:11.1 mm; Width Plain B:7.9 mm; d:19.100 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:5100 N; Fillet Radius ra:0.79 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Basic Dynamic Radial Load Rating C:9360 N; Grease Speed Rating Open/Shielded n1:16000 rpm; D:41.3000 mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
AH210 Withdrawal Sleeve 45x50x28mm Video