| No. | Brand | J | F | f | T | A | s | S | r |
| 3-9x40 | IKO | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| 5mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 70BNR10ETYNDUELP4 | NSK | - | - | - | - | - | - | - | - |
| CH-47914 | - | - | - | - | - | - | - | - | - |
| 650 | fag | - | - | - | - | - | - | - | - |
| 1.5-2.5t/H | - | - | - | - | - | - | - | - | - |
| 2303-2RS-TVH | fag | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| YZF-R6 | - | - | - | - | - | - | - | - | - |
| 1250*2500 | - | - | - | - | - | - | - | 4.763 mm | - |
| N211W | NSK | - | - | - | - | - | - | - | - |
| (80W | - | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | 74 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| CP2744 Thrust Plate 27x43.7x0.8mm | Cage Type:Plastic; d:40mm; SKU:7008ctrsulp3-nsk; Oil Limiting Speed (r/min):32500; B:15mm; Dynamic Load Rating (kN):20.6; Static Load Rating (kN):15.9; Grease Limiting Speed (r/min):21300; Weight:0.02 KGS; D:68mm; |
| CPR53568 Thrust Plate 35x68x5mm | D:180mm; SKU:22220-e1a-m-qbl; B:46mm; Cage Type:Brass; Seals or Shields:Open Type; Clearance:Standard; Availability:In Stock; d:100mm; Weight:0.02 KGS; |
| TMAS 340 Machinery Shim Kit | Clearance:Standard; Preload:Light; Dynamic Load Rating (kN):5.6; Grease Limiting Speed (r/min):50000; B:8mm; Availability:In Stock; Weight:0.02 KGS; d:12mm; Cage Type:Plastic; Seals or Shields:Open Type; |
| 87196 / CR87196 Stainless Speedi Sleeve For Shaft Repair | Fatigue load limit Pu:800 kN; Thrust factor K:1.07; Basic dynamic load rating C:4650 kN; T:279.4 mm; Design variant/feature:TQOSN/GWSI; r3,4 min.:3.3 mm; Mass bearing:191 kg; Basic static load rating C0:10000 kN; Calculation factor Y1:1.25; D1 ≈:517 mm; |
| EAZ 265 Induction Heater | Fillet Radius rb:0.040 in; Fillet Radius ra:0.08 in; B:0.7500 in; Basic Dynamic Radial Load Rating C:47500 N; D:5.0000 in; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:4800 rpm; Basic Static Radial Load Rating Co:51000 N; d:3.500 in; |
| FTRB75100 Thrust Bearing Ring / Thrust Needle Bearing Washer 75x100x1.5mm | B:109mm; d:160mm; Availability:In Stock; Cage Type:Steel; Seals or Shields:Open Type; SKU:24132cck30/c3w33-qbl; Clearance:C3; D:270mm; Weight:0.02 KGS; |
| TRC2233 Thrust Bearing Ring / Thrust Needle Bearing Washer 34.925x52.375x2.4mm | d:20mm; Dynamic Load Rating (kN):20; D:47mm; Weight:0.02 KGS; SKU:3204a-skf; Limiting Speed Rating (r/min):14000; Seals or Shields:Open Type; Cage Type:Steel; Reference Speed Rating (r/min):14000; Fatigue Load Rating (kN):0.51; |
| CR99254 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; SKU:mr105-zen; Seals or Shields:Open Type; Weight:0.20 KGS; B:3mm; Cage Type:Steel; d:5mm; D:10mm; Clearance:Standard; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
ZM115 Precision Locknut (M115x2)x150x22mm Video