| No. | Brand | J | F | f | T | A | s | S | r |
| IP65 | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 22310-E1-T41A | fag | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 150lm/W | INA | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| 12229-16G00-0B0 | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| 5x9x3mm | - | - | - | - | - | - | - | - | - |
| 96LED | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| JD10363, | John Deere | - | - | - | - | - | - | - | - |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| SUZUKI,,SX4 | - | - | - | - | - | - | - | - | - |
| 2004 | Dodge | - | - | - | - | - | - | - | - |
| 61944 | NSK | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 2200lm | - | - | - | - | - | - | - | - | - |
| 90lm/W | - | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| 90272 / CR90272 Stainless Speedi Sleeve For Shaft Repair | d:55mm; Seals or Shields:Open Type; B:43mm; Weight:0.02 KGS; D:120mm; Availability:In Stock; SKU:2311m/c3-qbl; Cage Type:Brass; Clearance:C3; |
| AH24140 Withdrawal Sleeve(matched Bearing:24140CCK,24140CAK,24140CCK30/W33, C4140K30V) | SKU:16038-fag; D:290mm; Cage Type:Steel; Weight:7.04 KGS; Availability:In Stock; Fatigue Load Rating (kN):6.3; d:190mm; B:31mm; Clearance:Standard; Static Load Rating (kN):166; |
| FTRD2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x2.5mm | B:60mm; Reference Speed Rating (r/min):1600; Clearance:Standard; SKU:23948emw33-timken; Dynamic Load Rating (kN):785; Seals or Shields:Open Type; Weight:12.90 KGS; d:240mm; Availability:In Stock; Limiting Speed Rating (r/min):1300; |
| 90113 / CR90113 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):61; Dynamic Load Rating (kN):48.5; Seals or Shields:Open Type; d:160mm; Grease Limiting Speed (r/min):2600; B:20mm; Availability:In Stock; Weight:1.23 KGS; D:200mm; Clearance:Standard; |
| CR170x200x15HMSA10 RG Shaft Oil Seal 170x200x15mm | D:100mm; Cage Type:Brass; B:36mm; d:45mm; SKU:22309emw33w800c4-tim; Availability:In Stock; Limiting Speed Rating (r/min):5100; Dynamic Load Rating (kN):180; Static Load Rating (kN):169; Clearance:C4; |
| VHIS 200 Bearing Induction Heater | Static Load Rating (kN):2360; Clearance:C3; Weight:0.02 KGS; Seals or Shields:Open Type; d:220mm; B:108mm; D:400mm; Cage Type:Steel; Fatigue Load Rating (kN):196; Reference Speed Rating (r/min):1500; |
| CP1.57095 Thrust Plate 70x94.3x1.5mm | Grease Speed Rating Open/Shielded n1:3600 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Sealed Speed Rating n3:2200 rpm; D:165.0000 mm; Accessories:Two Seals; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; B:18.00 mm; d:130.000 mm; Basic Dynamic Radial Load Rating C:37700 N; |
| 90773 / CR90773 Stainless Speedi Sleeve For Shaft Repair | SKU:6001rs-timken; Dynamic Load Rating (kN):5.1; Cage Type:Steel; Availability:In Stock; B:8mm; d:12mm; Limiting Speed Rating (r/min):23000; Seals or Shields:Single Rubber Seal; Weight:0.02 KGS; D:28mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
ZM80 Precision Locknut (M80x2)x105x18mm Video