| No. | Brand | J | F | f | T | A | s | S | r |
| 6D16 | - | - | - | - | - | - | - | - | - |
| E0/E1/MDF | INA | - | - | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| 24lbs | - | - | - | - | - | - | - | - | - |
| 500tph | - | - | - | - | - | - | - | - | - |
| 6002-2NSE | Nachi | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | 8 mm | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| 6213-MA-P6-C3 | fag | - | - | - | - | - | - | - | - |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| 35BG05S7G-2DL | Nachi | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| CR99186 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; B:9mm; Limiting Speed Rating (r/min):24000; d:15mm; Reference Speed Rating (r/min):--; Cage Type:Steel; D:32mm; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):5.6; Fatigue Load Rating (kN):--; |
| AH30/630 Withdrawal Sleeve 600x630x258mm | Dimension C:52.4 mm; Dimension S1:22.2 mm; Insert Bearing IB:ZMaRC; Width A:27.0 mm; Diameter G:10.3 mm; Shaft Diameter D:30 mm; Dimension L:82.6 mm; Dimension N:9.9 mm; Dimension F:12.7 mm; Basic Static Radial Load Rating Co:11200 N; |
| 85643 / CR85643 Stainless Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):64000; Cage Type:Plastic; SKU:7202cydu/glp4-nachi; Preload:Light; D:35mm; Static Load Rating (kN):4.55; Availability:In Stock; Seals or Shields:Open Type; B:11mm; Grease Limiting Speed (r/min):46500; |
| MSR40x1.5 Precision Locknut / MSR-M40x1.5 Locking Nut (M40x1.5)x58x22mm | Thrust factor K:1.99; Basic static load rating C0:22400 kN; Calculation factor Y2:3.4; Calculation factor Y1:2.3; B:450 mm; T:450 mm; d1 ≈:510 mm; D:660 mm; Comparative radial load rating CF:2320 kN; r3,4 min.:6 mm; |
| 85762 / CR85762 Stainless Speedi Sleeve For Shaft Repair | C:110 mm; Specific dynamic load factor K:150 N/mm²; b:15.5 mm; Basic static load rating C0:15300 kN; α:7 °; Sealing solution:Triple-lip seals; ra max.:1 mm; Specific static load factor K0:500 N/mm²; Material constant KM:330; Da min.:321.5 mm; |
| TKES 10S Endoscope | Clearance:Standard; SKU:7200bw-nsk; Availability:In Stock; Seals or Shields:Open Type; B:9mm; D:30mm; Cage Type:Steel; Static Load Rating (kN):2.5; Dynamic Load Rating (kN):5; Oil Limiting Speed (r/min):28000; |
| 150X180X15HMSA10RG Shaft Oil Seal 150x180x15mm | Seals or Shields:Open Type; Weight:0.02 KGS; Clearance:Standard; Availability:In Stock; D:35mm; SKU:2202j-qbl; Cage Type:Steel; d:15mm; B:14mm; |
| HMV94E / HMV 94E Hydraulic Nut 472x602x77mm | G:Tr 750x7; A:15 mm; Hydraulic nut:HMV 150 E; G1:65 mm; B1:515 mm; d1:670 mm; d:710 mm; B2:531 mm; Mass withdrawal sleeve:278 kg; G2:G 1/4; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
ZM65 Precision Locknut (M65x2)x85x16mm Video