| No. | Brand | J | F | f | T | A | s | S | r |
| NJ209EM | Rollway | - | - | - | - | - | - | - | - |
| C6908V | - | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 09263-16001-000 | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| 200W | - | - | - | - | - | - | - | - | - |
| (Zhr17) | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | 8 mm | - | - | - | - | - |
| 6903VV | NSK | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| ZX200 | - | - | - | - | - | - | - | - | - |
| 4WE | Rexroth | - | - | - | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| CR32 | FAFNIR | - | - | - | - | - | - | - | - |
| AH24128 Withdrawal Sleeve(matched Bearing:24128CCK30/W33, C4128K30V) | Cage Type:Plastic; d:20mm; Speed Rating (r/min):58680; B:12mm; D:42mm; Dynamic Load Rating (kN):3.33; Weight:0.06 KGS; SKU:2mmvc9104hxcrdul-tim; Availability:In Stock; Seals or Shields:Open Type; |
| ZM105 Precision Locknut (M105x2)x140x22mm | Bearing number:7405 A; Size (mm):25x80x21; Bore Diameter (mm):25; Outer Diameter (mm):80; Width (mm):21; d:25 mm; D:80 mm; B:21 mm; C:21 mm; Angle (α):25 °; a:26,4 mm; |
| TRE916 Thrust Bearing Ring / Thrust Needle Bearing Washer 14.275x25.4x4mm | Availability:In Stock; D:56.896mm; Cage Type:Steel; d:25.4mm; B:19.368mm; Weight:0.02 KGS; Clearance:Standard; Seals or Shields:Open Type; SKU:1780/1729-koyo; |
| 87916 / CR87916 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Fatigue Load Rating (kN):1.32; Static Load Rating (kN):31; d:70mm; Clearance:C3; SKU:6014-2rs1/c3-skf; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):3600; Dynamic Load Rating (kN):39.7; Weight:0.02 KGS; |
| 85762 / CR85762 Stainless Speedi Sleeve For Shaft Repair | C:110 mm; Specific dynamic load factor K:150 N/mm²; b:15.5 mm; Basic static load rating C0:15300 kN; α:7 °; Sealing solution:Triple-lip seals; ra max.:1 mm; Specific static load factor K0:500 N/mm²; Material constant KM:330; Da min.:321.5 mm; |
| FTRE5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x3mm | B:110mm; d:170mm; Limiting Speed Rating (r/min):2000; SKU:23234cck/w33-skf; D:310mm; Dynamic Load Rating (kN):1400; Availability:In Stock; Fatigue Load Rating (kN):173; Weight:0.02 KGS; Seals or Shields:Open Type; |
| TRA3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x0.8mm | Clearance:C3; Static Load Rating (kN):1.95; D:26mm; B:8mm; SKU:629-c-2hrs-c3-fag; Dynamic Load Rating (kN):4.85; Limiting Speed Rating (r/min):19000; Fatigue Load Rating (kN):0.099; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; |
| AS160200 Thrust Needle Roller Bearing Washer 160x200x1mm | Basic Static Radial Load Rating Co:38000 N; Oil Speed Rating n2:7500 rpm; d:50.000 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:61800 N; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:7500 rpm; B:27.00 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:4300 rpm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
ZM30 Precision Locknut (M30x1.5)x45x12mm Video