| No. | Brand | J | F | f | T | A | s | S | r |
| 6206-2RS1/C3 | SKF | - | - | - | - | - | - | - | - |
| 1200X1000 | - | - | - | - | - | - | - | - | - |
| 2FRM16-32/60L/J | Rexroth | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| Y2-Hb10B/Y2-Ha10B/Y2-Hb20B | - | - | - | - | - | - | - | - | - |
| VCL6P65A | Parker | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| 3-19mm | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| NJ218ECM | SKF | - | - | - | - | - | - | - | - |
| (Zhv74) | - | - | - | - | - | - | - | - | - |
| 3/4/5/6/7/8/9MM | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 30W-150W | - | - | - | - | - | - | - | - | - |
| 8x14x4mm | - | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| 8301-023-OMR | Parker | - | - | - | - | - | - | - | - |
| ZM75 Precision Locknut (M75x2)x98x18mm | Availability:In Stock; Clearance:Standard; Static Load Rating (kN):109.4; Weight:2.04 KGS; SKU:2mm9122wicrsuh-timke; D:170mm; Dynamic Load Rating (kN):102.7; Speed Rating (r/min):7500; d:110mm; Cage Type:Plastic; |
| AH3052 Withdrawal Sleeve 240x260x128mm | d:55.000 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:153000 N; D:140.0000 mm; B:66.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| 35 mm x 50 mm x 20 mm CP1932 Thrust Plate 19x31.5x0.8mm | Clearance:Standard; Availability:In Stock; D:57.15mm; Dynamic Load Rating (kN):48.5; Weight:0.02 KGS; SKU:m84548/m84510-timken; Seals or Shields:Open Type; B:19.431mm; Static Load Rating (kN):52.9; d:25.4mm; Size (mm):35 mm x 50 mm x 20 mm ; |
| CP3552 Thrust Plate 35x51.5x0.8mm | B:29mm; SKU:21311-e1-tvpb-c3-qbl; Seals or Shields:Open Type; Availability:In Stock; d:55mm; D:120mm; Cage Type:Plastic; Clearance:C3; Weight:0.02 KGS; |
| AS80105 Thrust Needle Roller Bearing Washer 80x105x1mm | Clearance:Standard; SKU:2205-2rstn-nsk; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; Oil Limiting Speed (r/min):14000; d:25mm; Availability:In Stock; B:18mm; Dynamic Load Rating (kN):12.4; Cage Type:Plastic; |
| TMIP 7-28 Internal Bearing Puller Kit | Reference Speed Rating (r/min):410; Weight:203.00 KGS; D:540mm; Cage Type:Steel; B:218mm; Limiting Speed Rating (r/min):390; Seals or Shields:Open Type; Dynamic Load Rating (kN):4790; d:320mm; Static Load Rating (kN):7530; |
| FTRB80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x1.5mm | D:90mm; Seals or Shields:Open Type; Clearance:Standard; B:33mm; Cage Type:Brass; Limiting Speed Rating (r/min):5600; Dynamic Load Rating (kN):147; Weight:1.10 KGS; d:40mm; SKU:22308kemw33-timken; |
| FTRA2542 Thrust Bearing Ring / Thrust Needle Bearing Washer 25x42x1mm | B:102mm; Seals or Shields:Open Type; Cage Type:Brass; Static Load Rating (kN):1590; D:300mm; SKU:22328came4c3-nsk; Dynamic Load Rating (kN):1160; Grease Limiting Speed (r/min):1200; d:140mm; Oil Limiting Speed (r/min):1500; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
ZM25 Precision Locknut (M25x1.5)x38x12mm Video