| No. | Brand | J | F | f | T | A | s | S | r |
| 46 | - | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| D3W1CNYC | Parker | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| 1214K | fag | - | - | - | - | - | - | - | - |
| 6310ZZC3 | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| 6030 | NSK | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 2/M | Rexroth | - | - | - | - | - | - | - | - |
| TRC-411 | koyo | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 87513 / CR87513 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; d:8mm; Availability:In Stock; Seals or Shields:Two Metal Shields; Weight:0.20 KGS; Clearance:Standard; B:3.5mm; SKU:smf128-2z-zen; D:12mm; |
| AOH3064G(23064CCK, 23064CAK, 23064CCK/W33, C3064KM Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Availability:In Stock; B:8mm; Limiting Speed Rating (r/min):30000; Static Load Rating (kN):1.97; Dynamic Load Rating (kN):4.55; Seals or Shields:Two Metal Shields; d:10mm; Reference Speed Rating (r/min):--; Weight:0.02 KGS; |
| TRD2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x3.2mm | Cage Type:Plastic; D:145mm; SKU:7019cd/p4aqbca-skf; Fatigue Load Rating (kN):3.1; Grease Limiting Speed (r/min):8500; Seals or Shields:Open Type; B:24mm; Availability:In Stock; Preload:Light; Dynamic Load Rating (kN):81.9; |
| TRB6681 Thrust Bearing Ring / Thrust Needle Bearing Washer 104.775x128.575x1.6mm | d:85mm; Weight:0.56 KGS; B:18mm; Dynamic Load Rating (kN):37.5; D:120mm; Seals or Shields:Open Type; Static Load Rating (kN):38.7; Speed Rating (r/min):10800; Clearance:Standard; Cage Type:Plastic; |
| 86551 / CR86551 Stainless Speedi Sleeve For Shaft Repair | w:78 mm; C1 max.:43 mm; d2 max.:162 mm; l7 min.:80 mm; r1 min.:1 mm; G:M 56x4; l5 ≈:40 mm; h1:200 mm; d:70 mm; Basic dynamic load rating C:880 kN; |
| CP1022 Thrust Plate 10x21.5x0.8mm | B:305 mm; Design variant/feature:NNUB.2/C3WO; Da max.:500 mm; Limiting speed:1300 r/min; da min.:360 mm; rb max.:4 mm; D:520 mm; Basic dynamic load rating C:3300 kN; Reference speed:900 r/min; Calculation factor kr:0.38; |
| 85073 / CR85073 Stainless Speedi Sleeve For Shaft Repair | SKU:22244-e1-c3-fag; d:220mm; Static Load Rating (kN):2360; Weight:0.02 KGS; Availability:In Stock; Fatigue Load Rating (kN):210; Cage Type:Steel; Limiting Speed Rating (r/min):2100; Reference Speed Rating (r/min):1360; Seals or Shields:Open Type; |
| FTRB90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x1.5mm | Availability:In Stock; SKU:22234cde4c3-nsk; B:86mm; d:170mm; Dynamic Load Rating (kN):990; D:310mm; Grease Limiting Speed (r/min):1100; Oil Limiting Speed (r/min):1400; Seals or Shields:Open Type; Cage Type:Steel; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AH3156H Withdrawal Sleeve Supplier Video