| No. | Brand | J | F | f | T | A | s | S | r |
| 12 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| F-53125.02.NUKR | INA | - | - | - | - | - | - | - | - |
| 4BDS1 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 511031 | Timken | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| NNU4940/W33 | INA | - | - | - | - | - | - | - | - |
| LH24D | RBC | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 60W | - | - | - | - | - | - | - | - | - |
| NJ209EM | Rollway | - | - | - | - | - | - | - | - |
| 1-11281037-0 | - | - | - | - | - | - | - | - | - |
| PGH4 | Rexroth | - | - | - | - | - | - | - | - |
| 45% | - | - | - | - | - | - | - | 4.763 mm | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| MSR17x1 Precision Locknut / MSR-M17x1 Locking Nut (M17x1)x35x18mm | Availability:In Stock; SKU:3209-b-tvh-fag; Reference Speed Rating (r/min):7800; Limiting Speed Rating (r/min):6700; Clearance:Standard; Static Load Rating (kN):37.5; Weight:0.63 KGS; Seals or Shields:Open Type; B:30.2mm; D:85mm; |
| EAZ 181 Induction Heater | d:55.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:14000 rpm; D:80.0000 mm; Basic Static Radial Load Rating Co:40500 N; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:37100 N; Oil Speed Rating n2:22000 rpm; B:26.00 mm; |
| 86013 / CR86013 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:5070 N; Oil Speed Rating n2:88000 rpm; d:10.000 mm; Grease Speed Rating n1:61000 rpm; D:22.0000 mm; Fillet Radius ra:0.30 mm; Fillet Radius rb:0.10 mm; B:12.00 mm; Basic Static Radial Load Rating Co:3100 N; |
| AS4060 Thrust Needle Roller Bearing Washer 40x60x1mm | Availability:In Stock; d:55mm; Fatigue Load Rating (kN):1.9; D:120mm; Condition:New; Cage Type:Steel; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; B:29mm; Dynamic Load Rating (kN):74.1; |
| 90179 / CR90179 Stainless Speedi Sleeve For Shaft Repair | D:110mm; Fatigue Load Rating (kN):1.86; Availability:In Stock; Dynamic Load Rating (kN):48.8; Weight:0.60 KGS; Grease Limiting Speed (r/min):11000; Preload:Light; Seals or Shields:Open Type; d:70mm; B:20mm; |
| AHX30/500 Withdrawal Sleeve 480x500x209mm | Static Load Rating (kN):25.6; d:45mm; B:16mm; Availability:In Stock; Weight:0.24 KGS; Cage Type:Plastic; Dynamic Load Rating (kN):18.3; Speed Rating (r/min):16100; SKU:3mm9109wicrdum-timke; Seals or Shields:Open Type; |
| 86145 / CR86145 Stainless Speedi Sleeve For Shaft Repair | B:20.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:13300 N; Basic Static Radial Load Rating Co:7800 N; Grease Speed Rating n1:18000 rpm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:22000 rpm; D:32.0000 mm; Fillet Radius ra:0.64 mm; |
| CR99835 Stainless Steel Speedi Sleeve For Shaft Repair | D:120mm; Clearance:Standard; SKU:22311ejw33w21a-timke; Availability:In Stock; Dynamic Load Rating (kN):266; Seals or Shields:Open Type; Static Load Rating (kN):265; Cage Type:Steel; Weight:2.40 KGS; Limiting Speed Rating (r/min):4300; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AH3160H Withdrawal Sleeve Supplier Video