| No. | Brand | J | F | f | T | A | s | S | r |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| 1x2x4x10x | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| 50% | INA | - | - | - | - | - | - | - | - |
| 4RSR12VM+220L | thk | - | - | - | - | - | - | - | - |
| 2/M | Rexroth | - | - | - | - | - | - | - | - |
| UC209D1 | NSK | - | - | - | - | - | - | - | - |
| R165149420 | Rexroth | - | - | - | - | - | - | - | - |
| 3LB1 | - | - | - | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| 22309EAK | NSK | - | - | - | - | - | - | - | - |
| ZX200 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| 4TNV98 | - | - | - | - | - | - | - | - | - |
| (DM-9600) | - | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 65 mm x 120 mm x 31 mm ZM15 Precision Locknut (M15x1)x25x8mm | Mass rod end:0.34 kg; B:16 mm; l4 max.:106 mm; d:20 mm; G:M 20x1.5; C1 max.:13.5 mm; r1 min.:0.3 mm; d4 ≈:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:30 kN; Size (mm):65 mm x 120 mm x 31 mm ; |
| 64998 Oil Seal 165.1x190.5x12.7mm | d:180mm; B:86mm; Cage Type:Steel; Seals or Shields:Open Type; Weight:0.02 KGS; Availability:In Stock; SKU:22236cck/c3w33-qbl; Clearance:C3; D:320mm; |
| AOH24168(24168CCK, 24168CAK, 24168ECCK30/W33 Bearing Withdrawal Sleeve) | SKU:6314ddu-nsk; Weight:2.57 KGS; Cage Type:Steel; Availability:In Stock; D:150mm; Grease Limiting Speed (r/min):3200; Seals or Shields:Two Rubber Seals; B:35mm; Dynamic Load Rating (kN):104; d:70mm; |
| FTRA1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x1mm | D:75mm; Fatigue Load Rating (kN):--; Reference Speed Rating (r/min):--; Dynamic Load Rating (kN):21; SKU:6009-2rs-koyo; B:16mm; Weight:0.02 KGS; Availability:In Stock; Seals or Shields:Two Rubber Seals; d:45mm; |
| FTRD6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x2.5mm | Basic dynamic load rating C:11000 kN; F:572.3 mm; Calculation factor kr:730; C:540 mm; Fatigue load limit Pu:2160 kN; D1 ≈:659 mm; d:485 mm; b:22.3 mm; Mass bearing:830 kg; K:12 mm; |
| 85885 / CR85885 Stainless Speedi Sleeve For Shaft Repair | s:19.5 mm; d:25 mm; H1:46 mm; D2:45 mm; Minimum load factor A:0.026; rb max.:0.3 mm; H:41.3 mm; C:7 mm; Fatigue load limit Pu:2.4 kN; D1 ≈:32 mm; |
| CR99060 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Static Radial Load Rating Co:32500 N; Fillet Radius rb:0.30 mm; Grease Speed Rating n1:6300 rpm; Oil Speed Rating n2:7500 rpm; Basic Dynamic Radial Load Rating C:33200 N; D:100.0000 mm; d:70.000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; |
| HMV10E / HMV 10E Hydraulic Nut (M50x1.5)*114*42mm | Design variant/feature:NNU/W33; Mass bearing:12300 kg; rb max.:8 mm; Limiting speed:150 r/min; r1,2 min.:19 mm; Basic static load rating C0:132000 kN; K:12 mm; Da max.:2260 mm; Fatigue load limit Pu:7100 kN; F:1709 mm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
AOH240/1060 (240/1060CAK, 240/1060CCK, 240/1060CCK/W33, 240/1060CAK30F/W33 Bearing Withdrawal Sleeve) Video