| No. | Brand | J | F | f | T | A | s | S | r |
| 1971-1976 | Timken | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 512038 | Timken | - | - | - | - | 60.325 mm | 25.4 mm | 0.794 mm | - |
| 8x8 | - | - | - | - | - | - | - | - | - |
| 40BCV09S1-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 5x9x3mm | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 606ZZ | - | - | - | - | - | - | - | - | - |
| 4RSR12VM+220L | thk | - | - | - | - | - | - | - | - |
| TRA5118 | - | - | - | - | - | - | - | - | - |
| 6204 | NTN | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| E70 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 2019 | Danfoss | - | - | - | - | - | - | - | - |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| TRB411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x1.6mm | B:17mm; Cage Type:Plastic; SKU:7207-b-tvp-fag; Reference Speed Rating (r/min):12000; Dynamic Load Rating (kN):27; Static Load Rating (kN):18.3; Fatigue Load Rating (kN):1.3; Seals or Shields:Open Type; Clearance:Standard; D:72mm; |
| EAZ 174 Induction Heater | Dynamic Load Rating (kN):365; Static Load Rating (kN):490; Clearance:C3; B:46mm; Grease Limiting Speed (r/min):2400; SKU:22220eake4c3-nsk; Oil Limiting Speed (r/min):3200; Seals or Shields:Open Type; Cage Type:Steel; D:180mm; |
| 99606 / CR99606 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Dynamic Load Rating (kN):1090; Cage Type:Brass; SKU:23044came4-nsk; B:90mm; Static Load Rating (kN):1980; Availability:In Stock; Weight:29.70 KGS; D:340mm; Oil Limiting Speed (r/min):1200; |
| 99291 / CR99291 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):19300; Oil Limiting Speed (r/min):13000; Seals or Shields:Two Rubber Seals; SKU:3204b-2rstn-nsk; Clearance:Standard; d:20mm; Static Load Rating (kN):12000; Grease Limiting Speed (r/min):9000; Cage Type:Plastic; Availability:In Stock; |
| 86454 / CR86454 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:160mm; Oil Limiting Speed (r/min):3000; B:32.5mm; SKU:30218-ntn; d:90mm; Clearance:Standard; Condition:New; Dynamic Load Rating (kN):208; Availability:In Stock; |
| 99303 / CR99303 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating n2:14000 rpm; Grease Speed Rating n1:11000 rpm; d:25.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:21200 N; Sealed Speed Rating n3:7500 rpm; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Static Radial Load Rating Co:10800 N; |
| CP6085 Thrust Plate 60x84.3x0.8mm | Seals or Shields:Two Metal Shields; B:2.5mm; d:4mm; Availability:In Stock; SKU:mr74-2z-zen; D:7mm; Clearance:Standard; Cage Type:Steel; Weight:0.20 KGS; |
| AH24126 Withdrawal Sleeve(matched Bearing:24126CCK/W33, C4126K30) | d:30mm; Availability:In Stock; Weight:0.11 KGS; Static Load Rating (kN):16.8; Speed Rating (r/min):25500; SKU:2mm9106wicrsuh-timke; Clearance:Standard; Dynamic Load Rating (kN):10.3; Cage Type:Plastic; B:13mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AOH31/1060 (231/1060CAK/W33, 231/1060CAK, 231/1060CCK, 231/1060CCK/W33Bearing Withdrawal Sleeve) Video