| No. | Brand | J | F | f | T | A | s | S | r |
| 43 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 0.5mm | - | - | - | - | - | - | - | - | - |
| 071N1151 | Danfoss | - | - | - | - | - | - | - | - |
| 2019 | - | - | 1391 mm | - | - | - | - | - | - |
| 40PCS | - | - | - | - | - | - | - | - | - |
| CY14-1B | INA | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| PC120-3 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MSA-01-X-30, | YUKEN | - | - | - | - | - | - | - | - |
| HMVC14E | SKF | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| Qj315n2MPa | - | - | - | - | - | - | - | - | - |
| 37X13.50R20 | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | 8 mm | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| ZAX330-3 | - | - | - | - | - | - | - | - | - |
| 12/24V | - | - | - | - | - | - | - | - | - |
| CR99254 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; SKU:mr105-zen; Seals or Shields:Open Type; Weight:0.20 KGS; B:3mm; Cage Type:Steel; d:5mm; D:10mm; Clearance:Standard; |
| HMV76E / HMV 76E Hydraulic Nut 382x498x69mm | Fatigue load limit Pu:850 kN; d2 ≈:605 mm; Basic static load rating C0:12700 kN; Operating clearance factor k2:0.116; da min.:532 mm; Da min.:706 mm; ra max.:6 mm; da max.:654 mm; Misalignment factor k1:0.099; B:264 mm; |
| FTRE2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x3mm | D:75mm; Seals or Shields:Open Type; Limiting Speed Rating (r/min):9000; Cage Type:Steel; Clearance:C3; Weight:0.02 KGS; B:16mm; Availability:In Stock; Static Load Rating (kN):15.2; d:45mm; |
| CR99108 Stainless Steel Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):9000; d:120mm; Seals or Shields:Open Type; Weight:0.02 KGS; D:215mm; Preload:Light; Dynamic Load Rating (kN):189; Availability:In Stock; SKU:7224a5trsulp3-nsk; B:40mm; |
| AH313G Withdrawal Sleeve (matched Bearing:2213EK, 1313EK,21313CCK, C2213KTN9, C2212KV 22213EK) | r1,2 min.:0.6 mm; Fw:48 mm; Mass bearing:0.15 kg; Basic dynamic load rating C:36.9 kN; ra max.:0.6 mm; Limiting speed:4000 r/min; Fatigue load limit Pu:7.1 kN; Basic static load rating C0:58.5 kN; D:62 mm; Da max.:58 mm; |
| AH308 Withdrawal Sleeve (22208EK Bearing) | Clearance:C3; B:6mm; Weight:0.01 KGS; d:6mm; Reference Speed Rating (r/min):45000; Static Load Rating (kN):0.89; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):2.3; Limiting Speed Rating (r/min):38000; Availability:In Stock; |
| AOH3280G(23280CAK/W33, 23280CCK, 23280CAK Bearing Withdrawal Sleeve) | Basic Dynamic Radial Load Rating C:55300 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:57000 N; Sealed Speed Rating n3:2300 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; D:165.0000 mm; B:22.00 mm; Accessories:Two Seals; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; |
| CR99056 Stainless Steel Speedi Sleeve For Shaft Repair | G1:26 mm; d1:320 mm; Hydraulic nut:HMV 72 E; G2:G 1/4; A:9 mm; Mass withdrawal sleeve:25.5 kg; d:340 mm; G:Tr 360x5; Nut for removal:HM 3172; B2:288 mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AOH32/950 (232/950CAK/W33, 232/950CAK, 232/950CCK, 232/950CAK/W33 Bearing Withdrawal Sleeve) Video