| No. | Brand | J | F | f | T | A | s | S | r |
| 2020 | - | - | - | - | - | - | - | - | - |
| 400 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 50 | John Deere | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| Max40d | - | - | - | - | - | - | - | - | - |
| Ve9 | - | - | - | - | - | - | - | - | - |
| 0820215004 | Rexroth | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 6001C3 | SKF | - | - | - | - | - | - | - | - |
| T6DCM | - | - | - | - | - | - | - | - | - |
| YF0-81530-62-03 | - | - | - | - | 279.4 mm | - | - | - | - |
| NJ316 | NSK | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| 1-4/5" | - | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| (JHK-S06) | - | - | - | - | - | - | - | - | - |
| IR110X120X30 | INA | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 160.16.1424 | - | - | - | - | - | - | - | - | - |
| 6002ZZE | Nachi | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| 121400202001) | - | - | - | - | - | - | - | - | - |
| HMV69E / HMV 69E Hydraulic Nut 347x456x64mm | Reference speed:2800 r/min; G1:16 mm; B:67 mm; Ca min.:2.1 mm; Fatigue load limit Pu:73.5 kN; G:M 105x2; ra max.:2.5 mm; Operating clearance factor k2:0.106; D1 ≈:166 mm; Basic static load rating C0:695 kN; |
| 99439 / CR99439 Stainless Speedi Sleeve For Shaft Repair | B:46.00 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:2000 rpm; D:280.0000 mm; Basic Static Radial Load Rating Co:200000 N; Sealed Speed Rating n3:1400 rpm; d:180.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:190000 N; Oil Speed Rating Open/Shielded n2:2600 rpm; |
| AH208 Withdrawal Sleeve 35x40x25mm | Dynamic Load Rating (kN):9.95; Fatigue Load Rating (kN):0.212; Cage Type:Steel; Clearance:Standard; d:20mm; Availability:In Stock; Seals or Shields:Open Type; B:12mm; SKU:6004-skf; Reference Speed Rating (r/min):38000; |
| 99853 / CR99853 Stainless Speedi Sleeve For Shaft Repair | Material constant KM:330; Basic static load rating C0:23.5 kN; d2 max.:45 mm; B:16 mm; l3 min.:17 mm; N max.:45 mm; Tightening torque bolt with internal hexagon:10 N·m; C1 max.:11 mm; α:10 °; h1:48 mm; |
| CR99050 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):7.85; Availability:In Stock; Preload:Light; D:47mm; Clearance:Standard; Seals or Shields:Open Type; B:9mm; Oil Limiting Speed (r/min):39000; Weight:0.02 KGS; Static Load Rating (kN):5.95; |
| CR99182 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):2000; Limiting Speed Rating (r/min):1300; Seals or Shields:Open Type; D:300mm; d:180mm; Clearance:C3; Cage Type:Brass; B:96mm; Weight:27.60 KGS; Dynamic Load Rating (kN):1410; |
| CR99827 Stainless Steel Speedi Sleeve For Shaft Repair | J max.:225.425 mm; s:32.941 mm; H2:41.275 mm; J min.:209.55 mm; B:65.484 mm; Basic dynamic load rating C:193 kN; Limiting speed:3800 r/min; Mass bearing unit:8.62 kg; H:144.463 mm; A:88.9 mm; |
| ZM105 Precision Locknut (M105x2)x140x22mm | Bearing number:7405 A; Size (mm):25x80x21; Bore Diameter (mm):25; Outer Diameter (mm):80; Width (mm):21; d:25 mm; D:80 mm; B:21 mm; C:21 mm; Angle (α):25 °; a:26,4 mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AOH240/900 (240/900ECAK30/W33, 240/900CAK, 240/900CCK, 240/900CCK/W33 Bearing Withdrawal Sleeve) Video