| No. | Brand | J | F | f | T | A | s | S | r |
| 3 | - | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 100lm/W | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| AM119683 | John Deere | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| 1000d | INA | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| 12X3w | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | 1391 mm | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| 350 | - | - | - | - | - | - | - | - | - |
| AP2D36 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| E0/E1/MDF | INA | - | - | - | - | - | - | - | - |
| 70x100x16 | - | - | - | - | - | - | - | - | - |
| CR32 | FAFNIR | - | - | - | - | - | - | - | - |
| CR99081 Stainless Steel Speedi Sleeve For Shaft Repair | Grease Speed Rating Open/Shielded n1:3400 rpm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2200 rpm; Basic Static Radial Load Rating Co:80000 N; d:120.000 mm; Fillet Radius ra:2.00 mm; B:28.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:85200 N; |
| CR99828 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bearing:67 kg; Basic dynamic load rating C:1340 kN; T:80.963 mm; Calculation factor e:0.37; Da max.:660 mm; D:692.15 mm; r1,2 min.:6.4 mm; C:61.913 mm; Ca min.:13 mm; Da min.:646 mm; |
| AOH3264G(23264CCK, 23264CAK, 23264CCK/W33 Bearing Withdrawal Sleeve) | Dynamic Load Rating (kN):29; Seals or Shields:Open Type; B:16mm; Weight:0.02 KGS; D:110mm; Clearance:Standard; SKU:7916ctrsump3-nsk; Grease Limiting Speed (r/min):12200; Oil Limiting Speed (r/min):18500; Cage Type:Plastic; |
| CP8220270 Thrust Plate 220x268.5x8mm | Housing:FY 511 M; End cover:ECY 211; J6:148 mm; N:18 mm; Housing material:Cast iron; Hexagonal key size for grub screw N:4.763 mm; d:49.213 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Bearing:YAR 211-115-2F; SWN:7 mm; |
| 99423 / CR99423 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):208; Dynamic Load Rating (kN):2260; Seals or Shields:Open Type; Reference Speed Rating (r/min):1170; d:190mm; Availability:In Stock; Limiting Speed Rating (r/min):1820; SKU:22338-e1-k-c3-fag; Weight:0.02 KGS; Static Load Rating (kN):2700; |
| AOH24068 (24068CCK, 24068CAK, 24068CCK30/W33 Bearing Withdrawal Sleeve) | Grease Limiting Speed (r/min):11000; Cage Type:Brass; d:20mm; Availability:In Stock; B:21mm; D:52mm; Seals or Shields:Open Type; Clearance:C3; Static Load Rating (kN):4.7; Oil Limiting Speed (r/min):14000; |
| AOH2264G(22264CCK, 22264CAK, 22264CCK/W33 Bearing Withdrawal Sleeve) | d:140mm; D:210mm; SKU:23028-e1-k-tvpb-qbl; Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; B:53mm; Clearance:Standard; Cage Type:Plastic; |
| 99292 / CR99292 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; d:2.75 Inch; SKU:ls18-hoffmann; D:5.25 Inch; Weight:0.20 KGS; Seals or Shields:Open Type; B:0.938 Inch; Clearance:Standard; |
AOH241/800G (241/800ECAK30/W33, 241/800CAK, 241/800CCK Bearing Withdrawal Sleeve) Video