| No. | Brand | J | F | f | T | A | s | S | r |
| 634 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 1/2 | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| (21% | - | - | - | - | - | - | - | - | - |
| 600x400 | - | - | - | - | - | - | - | - | - |
| 271418 | - | - | - | - | - | - | - | - | - |
| 350W | - | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| 35X80X21X28 | - | - | - | - | - | - | - | - | - |
| PWD00A-400-18 | Parker | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| 7014CD/P4A | SKF | - | - | - | - | - | - | - | - |
| Covas-F250c | - | - | - | - | - | - | - | - | - |
| 3 | YUKEN | - | - | - | - | - | - | - | - |
| 2200lm | - | - | - | - | - | - | - | - | - |
| 1 | Parker | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| E0e1e2 | - | - | - | - | - | - | - | - | - |
| 1220mmx2440mmx18mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 99599 / CR 99599 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):1080; Cage Type:Brass; SKU:23038-e1a-k-m-c3-fag; Seals or Shields:Open Type; Fatigue Load Rating (kN):180; Clearance:C3; Availability:In Stock; Limiting Speed Rating (r/min):2400; Static Load Rating (kN):1550; Weight:0.02 KGS; |
| Plummer Block Housings SNV180-F-L + 22317-K + H2317X300 + TCV617X300 | B:22mm; D:110mm; Availability:In Stock; Weight:0.02 KGS; Clearance:C3; Seals or Shields:Two Rubber Seals; Cage Type:Steel; d:60mm; SKU:6212-2rs/c3-qbl; |
| CR99172 Stainless Steel Speedi Sleeve For Shaft Repair | D:150mm; Clearance:Standard; Cage Type:Steel; d:85mm; B:36mm; SKU:22217-e1-qbl; Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; |
| FTRE80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x3mm | d:670 mm; B1:280 mm; d1:630 mm; G1:50 mm; A:12 mm; G:Tr 710x7; G2:G 1/4; B2:294 mm; Mass withdrawal sleeve:125 kg; Nut for removal:HM 30/710; |
| CR99869 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Static Radial Load Rating Co:28000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:9500 rpm; Basic Dynamic Radial Load Rating C:30200 N; Grease Speed Rating n1:7000 rpm; D:62.0000 mm; d:30.000 mm; Accessories:One Seal & Snap-Ring; B:23.80 mm; Sealed Speed Rating n3:7000 rpm; |
| AH2236G Withdrawal Sleeve(matched Bearing:22236CCK,22236CAK,22236CAK/W33,22236CCK/W33) | Accessories:One Seal; Basic Dynamic Radial Load Rating C:43600 N; Basic Static Radial Load Rating Co:44000 N; d:110.000 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Grease Speed Rating Open/Shielded n1:4000 rpm; B:20.00 mm; Sealed Speed Rating n3:2500 rpm; Fillet Radius ra:1.00 mm; D:150.0000 mm; |
| 85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Limiting Speed Rating (r/min):4000; SKU:22317-e1a-k-m-c3-fag; Fatigue Load Rating (kN):50; B:60mm; Seals or Shields:Open Type; D:180mm; Dynamic Load Rating (kN):540; Cage Type:Brass; Static Load Rating (kN):560; |
| TRA1625 Thrust Bearing Ring / Thrust Needle Bearing Washer 25.4x39.675x0.8mm | P180°:49.8 kN; P60°:121 kN; Stabilizing ring:SR-18-15; H:192.088 mm; Adapter sleeve assembly:SNW 115x2.3/8; H2:41.275 mm; A2:223.838 mm; End plug (suffix Y):EPR 7; A1:98.425 mm; Housing:SAF 615; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
AOH240/800G (240/800CAK, 240/800CCK, 240/800ECAK30/W33 Bearing Withdrawal Sleeve) Video