| No. | Brand | J | F | f | T | A | s | S | r |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | 3.175 mm | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 4WE10C3X/CW230N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| IP20/IP44/IP67 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| 5.8g | - | - | - | - | - | - | - | - | - |
| NK20/20, | INA | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| 2700K/3000K | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 18X1220X2440mm | - | - | - | - | - | - | - | 4.763 mm | - |
| 25kg/Bag | - | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 84616 / CR84616 Stainless Speedi Sleeve For Shaft Repair | SKU:21311eake4-nsk; d:55mm; Oil Limiting Speed (r/min):5300; D:120mm; Cage Type:Steel; Grease Limiting Speed (r/min):4300; Availability:In Stock; Static Load Rating (kN):174; Weight:1.58 KGS; B:29mm; |
| 87503 / CR87503 Stainless Speedi Sleeve For Shaft Repair | Mass bushing:6.38 kg; D1:255 mm; d:220 mm; Specific dynamic load factor K:25 N/mm²; a:5 mm; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; Tolerance shaft:e7; |
| CR99821 Stainless Steel Speedi Sleeve For Shaft Repair | Cage Type:Brass; SKU:23948came4-nsk; Weight:13.30 KGS; Oil Limiting Speed (r/min):1200; D:320mm; B:60mm; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; Static Load Rating (kN):1300; |
| 99787 / CR99787 Stainless Speedi Sleeve For Shaft Repair | Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.08; Tolerance housing:H7; Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; B:150 mm; d:160 mm; D:180 mm; Specific static load factor K0:200 N/mm²; Mass bushing:1.5 kg; |
| 86562 / CR86562 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Dynamic Load Rating (kN):19.3; Availability:In Stock; Weight:0.24 KGS; d:45mm; D:75mm; B:16mm; Static Load Rating (kN):27; Speed Rating (r/min):17900; Clearance:Standard; |
| EAZ 246 Induction Heater | Clearance:Standard; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):30000; Cage Type:Plastic; d:65mm; Static Load Rating (kN):150.6; SKU:s7013cega/p4a-skf; Availability:In Stock; Weight:0.43 KGS; Dynamic Load Rating (kN):20.3; |
| 90113 / CR90113 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):61; Dynamic Load Rating (kN):48.5; Seals or Shields:Open Type; d:160mm; Grease Limiting Speed (r/min):2600; B:20mm; Availability:In Stock; Weight:1.23 KGS; D:200mm; Clearance:Standard; |
| 81753 / CR81753 Stainless Speedi Sleeve For Shaft Repair | a:27.732 mm; Basic dynamic load rating C:240 kN; ra max.:3 mm; B:33 mm; T:36 mm; r1,2 min.:3 mm; d1 ≈:98.75 mm; Da max.:129 mm; d:65 mm; Limiting speed:4800 r/min; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
AOH31/800 (231/800CAK, 231/800CCK, 231/800CAK/W33, C31/800KMB,C31/800K Bearing Withdrawal Sleeve) Video